Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product.
Features & Benefits FRONT 1. SNOOZE/LIGHT Button 2. Atomic Clock Sets itself to the correct time and automatically updates for Daylight Saving Time. 3. AM/PM Indicator 4. Time Zone Indicator 5. " ALARM ON" Indicator Icon 6. Date 7. Day of the Week SIDE/BOTTOM 8.
SETUP Clock Setup Install or Replace Batteries 1. Remove the battery compartment cover. 2. Insert 3 x AA alkaline batteries into the battery compartment, as shown. Follow the polarity (+/-) diagram in the battery compartment. 3. Replace the battery cover. Install or Replace Batteries...
Atomic Clock (RCC) AcuRite atomic clocks use a radio-controlled signal (RCC) to synchronize to the correct time broadcast by the National Institute of Standards and Technology (NIST) Radio Station WWVB, located near Fort Collins, Colorado. WWVB broadcasts the current time and date with split-second accuracy. The atomic clock and calendar will maintain the correct time and date, and automatically update for Daylight Saving Time to provide the most accurate timekeeping standard possible.
Alarm Clock Placement Place alarm clock in a dry area free of dirt and dust. To help ensure an accurate indoor temperature measurement, be sure to place the clock away from heat sources or vents. Important Placement Guidelines • To ensure accurate temperature measurement, place out of direct sunlight and away from any heat sources or vents.
OPERATION Using the Clock Set the Alarm Time Press AND HOLD the “ALARM ON/OFF ” button for 5 seconds to enter ALARM SET MODE. To adjust the currently selected (flashing) item, press and release the “▲” or “▼“ buttons (press and HOLD to fast adjust). To save your adjustments, press and release the “ALARM ON/OFF“...
Troubleshooting • Verify that the batteries are installed correctly. Batteries may need to be replaced. • The optimum viewing angle for this product is from slightly Clock is too dark, above it. hard to read or • Reset the unit by pressing the reset button, located in the doesn’t work battery compartment.
Care & Maintenance Clock Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Specifications 32ºF to 99ºF, 0ºC to 37ºC TEMPERATURE RANGE 3 x AA alkaline batteries POWER...
Page 10
INST - 13030 052708 Alarm Clock with Atomic Clock® #13131 Instruction Manual Package Contents: (1) Alarm Clock (1) Instruction Manual Thank You for purchasing this ACURITE® product. This alarm clock features Atomic clock technology, which maintains split second accuracy and automatically changes for Daylight Saving Time.
Page 11
About the Atomic Clock A clock is considered atomic if it has an accuracy of one second in a million years. Consumer clocks are considered atomic if they attain this accuracy by receiving a signal from an atomic clock. In North America, the National Institute of Standards and Technologies operates an atomic clock in Colorado which transmits the time codes via the the radio station WWVB.
Page 12
3 • OPERATION Alarm Clock Setting To set the alarm time, press AND HOLD the “ALARM” button on the side of the alarm clock until the HOUR flashes to enter into alarm time set mode. 1. Press the “ ” or “ ” buttons to adjust the hour, note the AM/PM indicator. 2.
Page 15
Discover a comprehensive collection of furniture & decoration on our website.
Need help?
Do you have a question about the 13131A3 and is the answer not in the manual?
Questions and answers