Subscribe to Our Youtube Channel
Related Manuals for Babybee ROVER Bassinet
Summary of Contents for Babybee ROVER Bassinet
- Page 1 ROVER bassinet www. babybeeprams.com.au Please keep this manual for future reference...
-
Page 2: Table Of Contents
Hello! Thanks for choosing the babybee ROVER bassinet. Before you get started, please note the safety warnings below: Safety First The safety of your family WARNING is our number one priority. Please take the time to carefully read this manual... -
Page 3: Step One: Setup The Base
Step One Setup the base To set up your bassinet, pull the black metal rods into place as shown. This will give your bassinet its structure. Zip the cream bassinet fabric onto the frame as shown, and insert the bassinet mattress. -
Page 4: Step Two: Attach The Canopy
Step Two Attach the canopy Next, attach the plastic Starting from the right side canopy clips to their of the bassinet, zip the respective sides, ensuring canopy onto the frame. that they sit over the small plastic guides located on Tip: The canopy end, is the each side of the bassinet end with the zip that stops... -
Page 5: Step Three: Attach The Footcover And Belly Bar
Step Three Attach the foot cover and belly Starting from the right, zip the foot cover onto the bassinet (at the opposite end to the canopy). To attach the belly bar, simply click it in to the slots ensuring that the release buttons are on the outside and you hear a ‘click’. -
Page 6: Using Your Rover Bassinet
Using your ROVER bassinet Attaching the bassinet Attach the bassinet to the central connectors on the pram frame. To release, lift the bassintet release buttons upwards and simply lift off. The bassinet can face either direction with parent facing preferable. Adjusting the canopy Adjust the canopy as needed to protect your child from the... -
Page 7: Cleaning Instructions
Rain cover Pull the rain cover over the top of the canopy and down over the sides of the bassinet. Ensure the air ventilation holes are not obstructed and that air can circulate through. Cleaning instructions Rust may occur due to All plastic, fabric and environmental factors. -
Page 8: Safety Warnings
Safety Warnings The babybee ROVER bassinet is designed and tested to comply with AS/ NZS2088:2013. WARNING To avoid injury or Maximum weight that death: always apply can be carried in the the brakes whenever bassinet is 9kg. the stroller is stationary. -
Page 9: Warranty Information
Never leave rain accessories that are covers, hoods or not approved for use blankets on or over with the babybee the bassinet indoors, in ROVER range. a hot atmosphere or near a heat source. Always supervise whilst the stroller is... - Page 10 Contact hello@babybeeprams.com.au babybee prams @babybeeprams Version: September 2017 Information subject to change. Please see website for current version. www.babybeeprams.com.au...
Need help?
Do you have a question about the ROVER Bassinet and is the answer not in the manual?
Questions and answers