FAN-COIL HIGH PRESSURE INDEX INTRODUCTION RECOMMENDATIONS IDENTIFICATION OF THE UNIT TRANSPORTATION, RECEIVING, HANDLING SAFETY PROVISIONS GENERAL DIMENSION UNIT 1÷5 TECHNICAL DATA UNIT 1÷5 GENERAL DIMENSION UNIT 6÷7 TECHNICAL DATA UNIT 6÷7 RECOMMENDATIONS FOR INSTALLATION INSTALLATION OF THE AIR TREATMENT UNIT EXAMPLE OF ACCESSORIES USE AND COMPATIBILITY ASSEMBLY DIAGRAM PAM (SUPPLY PLENUM) ASSEMBLY DIAGRAM...
FAN-COIL HIGH PRESSURE INTRODUCTION IDENTIFICATION OF THE UNIT This installation and maintenance booklet should always accompany the air tre- The air treatment units come with a rating plate, which shows: atment unit for ready consultation by the installer or user if necessary. The unit should be installed in compliance with the regulations in force in each country - The manufacturer's address;...
FAN-COIL HIGH PRESSURE RECOMMENDATIONS FOR INSTALLATION Before installing the unit, ensure that: 1) The place of installation has sufficient space for carrying out installation as Drill the holes in line with the relative slots for the 6 unit screw anchors (Pic.
FAN-COIL HIGH PRESSURE EXAMPLE OF ACCESSORIES USE AND COMPATIBILITY UNIT Aluminium damper Air intake grill Air supply grill Depending on the requirements, the air filter can have a thickness of 12/25/48 mm 06.18 Ref. 207483 Rev.102...
FAN-COIL HIGH PRESSURE SSP ASSEMBLY DIAGRAM CANALIZABLE SIDE Lined up to the edge UNIT + ACCESSORIES SCREWS LEGEND SSP 1÷5 SIDE x8 Screw TC+M5x12 UNI7687 Shorter to mix the air flow x6 Hex nut M5 flanged with corrugated washer DIN4161 SCREWS LEGEND SSP 6÷7 x10 Screw TC+M5x12 UNI7687 x6 Hex nut M5 flanged with corrugated washer DIN4161...
FAN-COIL HIGH PRESSURE HYDRAULIC CONNECTION MAIN HYDRAULIC CONNECTION CAUTION! Always use a wrench and counter-wrench for connection of the coil to the pipes (pic. 25). If the valve is installed, suitably insulate the valve body with insulating material (pic. 26). Connect the water inlet and outlet pipes, observing the indications given on the side of the unit.
FAN-COIL HIGH PRESSURE CLEANING AND MAINTENANCE TURNING THE COIL CAUTION CAUTION Before carrying out any cleaning or maintenance work, disconnect the The fan wheels may reach the speed of 1,000 rpm. Do not insert objects into the unit from the mains electricity supply! electric fan and certainly not hands.
FAN-COIL HIGH PRESSURE WHAT TO DO IF... There is little outflowing air Possible cause: incorrect speed setting on the control panel Possible remedy: select the right speed Possible cause: clogged filter Possible remedy: clean the filter Possible cause: obstruction of the airflow on the intake or delivery line Possible remedy: remove obstruction...
Page 24
FAN-COIL HIGH PRESSURE NOTES 06.18 Ref. 207483 Rev.102...
Page 25
HIPLUS AIRE ACONDICIONADO S.L. Masia Torrents, 2 Tel. +34 93 893 49 12 Fax. +34 93 893 96 15 08800 Vilanova i la Geltrú Barcelona, Spain www.hitecsa.com We reserve the right to change specification without notice. 06.18 Ref. 207483 Rev.102...