1. Manuals
  2. Brands
  3. AirRaid Audio Manuals
  4. Recording Equipment
  5. Elements A-Filter
  6. Operation manual

AirRaid Audio Elements A-Filter Operation Manual

Stereo filter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
[ OPERATION MANUAL ]


Updated: 28.09.16

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elements A-Filter and is the answer not in the manual?

Questions and answers

Related Manuals for AirRaid Audio Elements A-Filter

Summary of Contents for AirRaid Audio Elements A-Filter

  • Page 1 [ OPERATION MANUAL ] 
 Updated: 28.09.16...
  • Page 2 Elements A-Filter Welcome! Thank you for purchasing Elements: A-Filter. A-Filter is an analog-modelled dynamic stereo filter which integrates seamlessly into our Elements modular series. It combines a highly tweakable envelope follower with a dual filter, complete with 8 all-new filter types. On the rear panel you will find stereo CV inputs for the main controls, which allow Filter to be plugged into Elements devices which feature stereo CV output, such as the DS-LFO.

  • Page 3: Loading And Saving Patches

    Elements A-Filter Contents Welcome! Loading and saving patches Controls and displays Env Follower Analog Filter FIlter Types Global Rear Panel Loading and saving patches Loading and saving patches in A-Filter is done in the same way as with any other Reason device.
  • Page 4 Elements A-Filter ANALOG FILTER A-Filter’s analog filter is an insanely squelchy dual filter with 8 varied filter types. By “dual filter” we mean, of course, that certain filter types in fact combine two filters in series or parallel and allow their respective frequencies to be offset, creating a vast range of possible tones. With each control being assignable to the envelope follower, A-Filter is the tool par excellence for adding instant analog charm to any sound.
  • Page 5 Elements A-Filter BP2 — 2-pole band-pass filter. Freq ranges from between 50 Hz to 10 kHz. Width controls the width of the filter, i.e. raising Width lowers the high-pass cutoff component of the filter and raises the low-pass cutoff respectively, around the center frequency specified by the Freq control.
  • Page 6 Elements A-Filter two CV outputs from any Reason device). These parameters also allow for mono CV modulation, which is active if only the left CV input is connected (in much the same way that connecting only the left audio input of a stereo pair gives you a mono audio signal).

Table of Contents