1. Manuals
  2. Brands
  3. AirRaid Audio Manuals
  4. Recording Equipment
  5. Elements G-Filter
  6. Operation manual

AirRaid Audio Elements G-Filter Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
[ OPERATION MANUAL ]



Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Elements G-Filter and is the answer not in the manual?

Questions and answers

Related Manuals for AirRaid Audio Elements G-Filter

Summary of Contents for AirRaid Audio Elements G-Filter

  • Page 1 [ OPERATION MANUAL ] 
...

  • Page 2: Welcome

    Elements G-Delay Welcome! Thank you for purchasing Elements G-Filter. G-Delay is the definitive dynamic grain-delay device. It combines an all-new granular engine (featuring frequency, pitch, and spray controls) with an assignable envelope follower, which can be plugged into any of the main parameters. We've then rounded it off with a couple of filters, and all the CV connectivity you'd care to throw a rock at.

  • Page 3: Table Of Contents

    Elements G-Delay Contents Welcome! Loading and saving patches Front controls and displays Env Follower Delay Global Rear controls CV Modulation Audio I/O Loading and saving patches Loading and saving patches in G-Filter is done in the same way as with any other Reason device.

  • Page 4: Delay

    Elements G-Delay DELAY A-Filter’s analog filter is an insanely squelchy dual filter with 8 varied filter types. By “dual filter” we mean, of course, that certain filter types in fact combine two filters in series or parallel and allow their respective frequencies to be offset, creating a vast range of possible tones. With each control being assignable to the envelope follower, A-Filter is the tool par excellence for adding instant analog charm to any sound.

  • Page 5: Global

    Elements G-Delay Note: By “mono delay”, we do not mean that the outputted audio signal will be mono, as no summing takes place, only that the delay times of the Left and the Right channels will be identical. Equal — Ensures that the Left and Right channels’ feedback times are equal, regardless of each one’s individual settings.

  • Page 6: Audio I/O

    Elements G-Delay connecting the left and right CV input for that specific parameter to a different CV source (such as the twin CV outputs of our Elements - DS-LFO device.) These parameters also allow for monophonic CV modulation, which works if only the left CV input is connected (in much the same way that connecting only the left audio input of a stereo pair gives you a monophonic audio signal.) The parameters that can be modulated monophonically via CV are:...

Table of Contents