Arizer AIR Booklet

Please read this booklet before you get started.

Charging:

When the battery is low, the lower LED light glows solid red. This light flashes
green while charging and glows solid green when the battery is fully charged.
• Only use the charger supplied by Arizer
• Protections built into the Air prevent overcharging, so it can safely be left
plugged in even after it is fully charged.

Cleaning:

A stainless steel tool is included with the Arizer
the glass stem and heating unit after use.
After numerous uses the glass stems should be thoroughly cleaned to ensure
optimal performance:
• Remove the plastic mouthpiece from the glass stem and soak both parts
in isopropyl alcohol or dish soap. If using alcohol, soak the plastic mouth-
piece for no more than 30 minutes. Rinse with hot water and repeat as
necessary.
AIR
The Arizer Air includes:
TM
• 1 warming unit
• 1 charge cord
• 2 glass stems (one with a
plastic mouthpiece)
• 1 carrying case
• 1 clear protective silicone skin
• 1 stainless steel stirring tool
• 2 silicone stem caps
When using your new Arizer
Air for the first time:
• Look over all the parts included to
ensure they are in good condition.
• Charge the battery completely before
using for the first time.
• Warm the unit to the hottest tempera-
ture setting before inserting a glass
stem. This will make inserting the
Glass Stem easier, and will be neces-
sary the first few times. After a few
uses there will be less resistance when
inserting the glass stem.
.
TM
Air to remove material left in
TM
TM