Advertisement
Installation
Smart wall socket Aqara Smart Socket ZigBee Version is easy to install, no
need to modify the original wiring, just install it instead of a traditional wall
outlet, the specific installation steps are as follows:
1. Turn off the main power source switch, unscrew the screws on the back of
the socket, connect the supply wire to terminal L and the neutral wire to
terminal N, connect the ground wire to the terminal in the middle, tighten the
screws, the wiring diagram is shown below.
2. Using a flat screwdriver, open the front panel of the socket.
3. Using screws, fix the socket in the box on the wall.
XIAOMI-MI.COM
Advertisement
