Audio Adjustment; Setting The Voltage (Optional); Setting The Clock; Volume Adjustment - LG LM-M140X Owner's Manual

Audio Adjustment

Setting the voltage (OPTIONAL)

If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.

Setting the CLOCK

Press CLOCK.
1 1
(If the clock requires setting, press and hold
CLOCK for more than 2 seconds.)
- The hours begin to blink.
Select a 24 hour cycle or 12 hour cycle by
2 2
pressing PRESET DOWN/UP or turning MULTI
JOG.
(12HR)
Press SET to confirm the selected hour
3 3
cycle.
Use PRESET DOWN/UP or MULTI JOG to set
4 4
the correct hours.
Press SET.
5 5
Use PRESET DOWN/UP or MULTI JOG to set
6 6
the correct minutes.
Press SET and the correct time is shown on
7 7
the display.
Press CLOCK at any time to display the time
8 8
for about 3 seconds.

Volume Adjustment

• Turn VOLUME CONTROL KNOB clockwise to
increase the sound level, or counterclockwise to
decrease it.
• Press VOLUME ( ) to increase the sound level, or
press the VOLUME ( ) to decrease it on the remote
control.

Sound Quality Adjustment

• To activate stereo sound
You can choose between 4 fixed sound impressions.
Select a desired sound mode by using EQ PATT.
button on the remote control or EQ button on the
front panel.
FLAT : linear frequency response
ROCK : more bass, more treble
POP : less bass, less treble
CLASSIC : for orchestral music
• Headphone Socket
Connect a stereo headphone plug ( 6.3mm) into the
headphone jack.
The speakers are automatically disconnected when
you plug in the headphones (not supplied).
8
or (24HR)

Sleep Function

When the sleep timer is used, the power is automatically
turned off after the specified time has elapsed.
To specify the time delay before the power is
1 1
turned off, press SLEEP.
In the display window you can see
for about 5 seconds. This means that the system
turns off automatically after 90 minutes.
Each time the button is pressed the time interval
before it turns off is reduced by 10 minutes. i.e.
80...70... etc.
Select the desired time to turn off.
To check the remaining time until the power is
2 2
turned off.
While the sleep function is active press SLEEP
briefly. The time remaining until it turns off is
displayed for about 5 seconds.
ote
If you press SLEEP while the sleep time is displayed,
the SLEEP time is reset.
To cancel the sleep timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until SLEEP 10 appears, and then press
SLEEP once again while SLEEP 10 is displayed.

MUTE

Press MUTE to mute your unit.
You can mute your unit in order, for example, to answer
the telephone, "MUTE" indicator blinks in the display
window.

SURROUND

To activate surround mode
Press SURR. to reinforce surround effect.
SURROUND OFF ↔ SURROUND ON

XDSS (Extreme Dynamic Sound System)

Press XDSS to reinforce treble and bass.
The "XDSS ON" or "XDSS OFF" indicator lights up.
To cancel it press XDSS again.