Damall D-2304 Setup Manual

Elastix server
Hide thumbs Also See for D-2304:

Advertisement

Damall D-2304 and Elastix Server
Damall D-2304 and Elastix Server
Damall D-2304 and Elastix Server
http://www.elastix.org
http://www.elastix.org
http://www.elastix.org
Setup Guide
Setup Guide
Setup Guide

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D-2304 and is the answer not in the manual?

Questions and answers

Summary of Contents for Damall D-2304

  • Page 1 Damall D-2304 and Elastix Server Damall D-2304 and Elastix Server Damall D-2304 and Elastix Server Setup Guide Setup Guide Setup Guide http://www.elastix.org http://www.elastix.org http://www.elastix.org...
  • Page 2 Figure 1-1 Figure 1-1 Figure 1-1 is a setup diagram for a single IP Phone Damall D-2304 is a setup diagram for a single IP Phone Damall D-2304 is a setup diagram for a single IP Phone Damall D-2304 configuration. The phone is setup as a SIP telephony device.
  • Page 3 4.0 Setup Procedure Damall D-2304 Server Setup Guide To set up the Elastix Server for the Damall D-2304, 1. Go to the web address of the Elastix Server Login page. The web address is determined by the customer, for this guide we have used the IP address 192.168.5.186 2.
  • Page 4 PaloSanto Solutions PaloSanto Solutions PaloSanto Solutions Damall D-2304 Server Setup Guide Damall D-2304 Server Setup Guide Damall D-2304 Server Setup Guide 5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to 5. Click on the Submit button to add an extension, see Figure 4-3. This will take you to 5.
  • Page 5 9. With this you have just finished creating a SIP extension that will be used by the Damall D-2304 to register with the Elastix Server. Repeat Steps 5 through 8 to similarly create another extension (different values on Step 6) to be used by the IP (SIP) Phone to register as well (extension 302 in this example).
  • Page 6 Damall D-2304 Server Setup Guide Figure 4-7. Damall D-2304 WebUI 12. Use the information from the Add SIP Extension page (Figure 4-4) to enter the following necessary information on “SIP Config“ section of the Damall Phone WebUI:  Enable Identity: Checked ...
  • Page 7 14. Configure the other IP (SIP) Phone with the correct parameters. 15. To test the Damall D-2304, pick up the previously configured IP (SIP) Phone and call the Damall D-3204’s extension number (301 in this example). When the call is established, speak into the phone and verify that the other IP (SIP) Phone can hear your voice.

Table of Contents