Table of Contents
Advertisement
Information and advice
Safety first!
Before use unroll the power cord
completely.
Remove the plug from the socket before
filling your iron with water.
Always switch your iron off when you
have finished.
Do not leave unattended while it is connect
to the supply mains even if its only for a
short while. Remove the plug from the
socket and stand the iron upright.
Never immerse your iron in water.
If you want to wrap the power cord around
the iron for storage, make sure the iron
has cooled down.
If the suppy cord is damaged it must be
replaced by a qualified person.
Do not remove any fixed covers. Never use
this appliance if it is not working properly,
or if it has been dropped or damaged.
Make sure that children cannot touch the
iron when hot or pull the power cord.
Information
As irons heat up quicker than they cool down, always start with
articles requiring low heat (such as synthetic fibres or those with a
gloss or wrinkle finish) and leave those requiring higher temperatures
until last.
WARNING: If you are ironing fabric containing a mixture of fibres,
always select the temperature for the fibre requiring the lowest heat.
For example an article consisting of nylon and wool should be ironed
at the temperature indicated for nylon.
Remove any stickers or
protective foil and unroll mains
Temperature Control Setting
Nylon,
Wool, Silk or
Cotton, Linen
Acetate
Blends
or Steam
Check the ironing
instructions on the label in
your garment.
Sort fabrics according to
ironing temperature.
For example wool, cotton
and linen.
2
Advertisement
Table of Contents
