Model JOS 1E JET OF STEAM DIGITAL IRON...
Know your steam iron Please read these instructions before using your steam iron. Information WATER TANK SPRAY NOZZLE LID COVER (WATER TANK) STEAM BUTTON SPRAY BUTTON VARIABLE STEAM CONTROL TEMP. CONTROL BUTTON CONTROL PANEL 9. INDICATOR LIGHT (STANDBY) 10. SELF CLEAN BUTTON 11.
Information and advice Safety first! Information Before use unroll the power cord As irons heat up quicker than they cool down, always start with completely. articles requiring low heat (such as synthetic fibres or those with a Remove the plug from the socket before gloss or wrinkle finish) and leave those requiring higher temperatures filling your iron with water.
Using your Iron for the first time Remove any residue which may be left on the sole plate during manufacture. Information Remove any stickers or Gently open the lid cover. If the water in your protective foil and unroll the area is very hard, the mains lead.
TROUBLESHOOTING If the iron does not operate, try the following suggestions: Information Make sure the plug is connected and switched on the mains Make sure the temperature control button is set to the 1 Press the temperature control Plug into a suitable electrical dot setting or higher.
Steam ironing Do not start steam ironing until the control panel light goes out. Information Thick garments such as jeans require a greater Remove the plug from the socket. Turn the variable steam control Gently open the lid cover. 'X' . amount of steam to iron Fill your iron with water to them than lighter...
Dry ironing Spraying Spraying may be used on any Turn the variable steam control Ensure there is water in the tank This will stop the steam before spraying. setting. 'X'. Press the spray button . function. Information It may be necessary to prime the system by pressing the spray button several times.
Draining your iron Always drain your iron immediately after use and never store your iron with water in its tank. Information Remove the plug from the socket. Gently open the lid cover. Turn the variable steam control If the water in your to 'X'.
Self clean (auto clean system) Self clean should be carried out regularly to prolong the life of your iron. Information Remove the plug from the socket. Stand your iron upright. Plug Turn the temperature control dial When cleaning your Turn the variable steam control into a suitable electrical socket.
Auto off system Information If the iron is placed in a horizontal When the iron is plugged into the When cleaning your mains supply the unit will “beep” position and is stationary and the standby indicator will flash. (for 30sec) the unit will iron's sole plate, never This will automatically go off when automatically go into standby.
Control Panel - LED. TEMP. LED. IRONING TEMP. DOWN GREEN Selected Selected Heating temp. temp. AMBER Heating Cooling When you have chosen your selected temperature the indicator will glow red. Once the lron has reached the desired temperature the light will glow green. The amber LED indicates the transition of temperature ( up or down ) until your selected setting has been reached.
Specifications 230V ~ 50Hz 2200W WARNING. A mains plug severed from the mains lead of this appliance must be destroyed. A mains plug with bared wires is hazardous if engaged in a mains output line socket. Direct Partmaster Direct can provide accessories, spares, batteries and replacement parts with Next Day Delivery available upon request.