Connecting via WPS
Locating the Camera's WPS Button
Dome Camera
Pairing it with your Router
1.
Power up the camera, after approximately 45 seconds you
will hear the camera make a "click" sound as it comes on-
line.
2.
Locate the WPS button on your router and press for a few
seconds to activate the WPS set-up mode (as per the
router's manufacturer instructions). Usually this will cause
an indicator light to activate.
3.
Press and hold the WPS button on the camera for 3-5
seconds, then release the button.
4.
You may see an indicator on the router to confirm that the
connection has been made but this depends on the router.
6
Cube Camera
IP Camera Quick Setup Guide
PT-DOME Camera