Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Pyronix CUBE-CAM/28
- Page 1 Wi-Fi Camera Quick Setup Guide Document SAP 102018493...
-
Page 2: Table Of Contents
Adding Camera to Smart Device App Frequently Asked Questions Customer Support Pyronix Training Academy Online Pyronix Training Academy Training Videos Technical Support Video Tutorial If you would prefer to watch a tutorial on how to set up the Wi-Fi cameras, scan the below QR code or simply go to www.pyronix.com/training... -
Page 3: Wi-Fi Camera Models
Wi-Fi Camera Models Indoor Cube Indoor PT-Dome Outdoor Mini Camera Camera Dome Camera CUBE-CAM/28 PTDOME-CAM/4 DOME-CAM/28 311300206 311300203 311300208 CUBE-CAM/4 DOME-CAM/4 311300207 311300204 DOME-CAM/6 311300204 Choosing the Correct Camera High Definition (HD) Video All cameras can record in 1080p on an high quality Micro SDHC card (not supplied), as well as provide the ability to watch both live and recorded footage on a smart device app. -
Page 4: Read Before Installation
SDHC card slot, please refer to the full camera installation manual. Wi-Fi Compatibility The Pyronix cameras are only compatible with 2.4Ghz Wi-Fi transmission frequency. Most modern routers (if not all) use a 2.4GHz Wi-Fi connection. In some situations, the 2.4GHz... -
Page 5: Download The Smart Device App
Download the Smart Device App Please download either the ProControl+ smart device app. ProControl+ Search either the Google Play Store or Apple store for ProControl+ or scan the QR below to be directed to a web page with direct links to the app in the stores. Minimum smart device operating systems Requires iOS 7.0 or above. -
Page 6: Connecting Via Wps
Connecting via WPS Locating the Camera’s WPS Button Dome Camera PT-DOME Camera Cube Camera Pairing it with your Router Power up the camera, after approximately 45 seconds you will hear the camera make a “click” sound as it comes on- line. -
Page 7: Adding Camera To Smart Device App
Adding Camera to Smart Device App First make sure that the camera and the smart device are connected to the same wireless network. Open the ProControl+ app 2. Click on the ‘+’ 3. Select ‘Online device’ 4 .Select the camera that you wish add 5. - Page 8 8. Tap ‘Add Device to 9. Select ‘Connect to a 10. Take note of the on ProControl+ Server’ at Network’ screen instructions and the bottom then tap ‘OK’ 11. Enter the Network 12. To enable 13. Input the same SSID and Wi-Fi ProControl+ services, device password that Password then tap...
- Page 9 14. Create an 15. The device will then 16. Once connected, encryption password connect to the Cloud it will then link to the and then tap ‘Enable server ProControl+ account ProControl+ Service’ 17. Check that ‘8000’ is 18. The device will now 19.
-
Page 10: Frequently Asked Questions
Frequently Asked Questions How many cameras can be put on one account? There is no limit to how many cameras can be put on one ProControl+ account. How many cameras can be viewed on the ProControl+ app at once? Up to 16 cameras can be viewed at once one the ProControl+ app. The choices on a split screen are 4, 9, 12 and 16 (double tapping a camera will change it to full screen). -
Page 11: Customer Support
Pyronix Training Academy. To start accessing an entire arsenal of training resources, simply email your full contact details and company name to videot@pyronix.com now. You will receive an email confirmation once your application has been approved.