KVH Industries TracPhone Fleet One Quick Start Manual

How to Make a Voice Call
FROM the Fleet One Terminal
Direct:
Dial 00<Country Code><Phone No.># or off-hook key
Using the Phone Book:
Dial 00<Short Dial No.># or off-hook key
Redial:
Last called: Dial 0*# or off-hook key
Last answered: Dial 00*# or off-hook key
Local Onboard (call to another handset):
Dial <Local No.># or off-hook key
Example: 0301# (analog) or 0501# (IP handset or
smartphone connected via WLAN)
How to Access the Internet
©2015 KVH Industries, Inc., All rights reserved. KVH and TracPhone are registered trademarks of KVH Industries, Inc. All other trademarks are the property of their respective companies.
The information in this document is subject to change without notice. No company shall be liable for errors contained herein. 54-1128 Rev. A
TracPhone
®
This guide provides basic operation information for the TracPhone Fleet One satellite
communications system. For complete installation, operation, setup, and diagnostics
information, refer to the User and Installation Manual. If you need any assistance, please
contact KVH Technical Support.

Technical Support

North/South America, Australasia:
Phone: +1 401 847-3327
E-mail: support@kvh.com
Fleet One Quick Start Guide
Europe, Middle East, Africa, Asia-Pacific:
Phone: +45 45 160 180
E-mail: support@emea.kvh.com
TO the Fleet One Terminal
Direct:
Dial +<Fleet One Phone No.>
Example: +870 772420567
"+" = International call prefix; varies by country
MobileLink:
1. International: Dial +1 212-401-0650
N. America: Dial 1-877-202-0367
2. Select a language when prompted
3. Dial <6-digit MobileLink Access Code>#
The access code is linked to the terminal's phone number.
You can access the Internet using any device connected
to the terminal (such as a smartphone or laptop).
1. On a connected device, start your web browser and
enter http://ut.bgan or the IP address of the Fleet
One terminal; default is http://192.168.0.1. (Your
browser's proxy server settings must be disabled.)
2. At the web interface dashboard, click Start Data
Connection. You should now have access to the
Internet. Click Refresh to update status.
3. When you are finished using the Internet, return to
the dashboard and click Stop Data Connection.
Using the web interface, you can set up the terminal to
automatically start a data connection at startup. See the
User and Installation Manual for details.