Replacing The Base Cover Assembly - Lenovo ThinkPad 11e Chromebook 4th Gen User Manual

7. Tighten the screws to secure the bottom cover.
8. Reinstall the removable battery.
9. Turn the computer over. Connect the ac power adapter and all cables to the computer.

Replacing the base cover assembly

Before you start, read "Important safety information" on page iii and print the following instructions.
Notes:
• Depending on the model, your computer might look slightly different from the illustrations in this topic.
• There might be a risk of short circuits if you remove the base cover assembly in the following situations:
– When your computer has the removable battery installed
– When your computer is connected to ac power
Besides, the computer will not start after you reinstall the base cover assembly. To start the computer,
disconnect the ac power adapter and then reconnect it to the computer.
To replace the base cover assembly, do the following:
1. Disable the built-in battery. See "Disabling the built-in battery" on page 61.
2. Ensure that the computer is turned off and disconnected from ac power and all cables.
3. Close the computer display and turn the computer over.
4. Loosen the screws that secure the base cover assembly in ascending alphabetical order (a to h) as
illustrated.
.
Chapter 7 Replacing devices
63