Advertisement
E-mailSettings
■
Changing your e-mail address
E-mail (@ezweb.ne.jp) is a service that enables you to exchange e-mails
with other cell phones, which support e-mail, and with PCs. Your e-mail
1
address is decided automatically after the initial settings.
The e-mail address in the initial settings can be changed.
■
Initial Settings
1
2
On the E-mail screen,
[
] → [Change
Address/Setting Filter]
5
On the Home screen, [
]
Confirm e-mail address →
[閉じる (Close)]
* If the confirmation screen for
e-mail application appears,
check the content and follow
the onscreen instructions.
■
Confirming your e-mail address
1
2
Enter e-mail address →
[送信 (Send)]
On the E-mail screen, [
]
Your e-mail address appears in the
→ [E-mail information]
E-mail address field.
* The initial setting of the e-mail cannot be performed via Wi-Fi
®
communications.
TransferringContacts
HowtoTransferDatafromtheauSettingsMenu
You can transfer data from your previous phone to the product using a
Return or store data from your previously used au phone to this product using a microSD card or the au Smart Pass server.
microSD memory card.
• You need to setup an au ID to restore or save data using au Smart Pass servers.
1
2
3
• If you use a microSD memory card to restore data, save the data from your previous au phone to a microSD memory card.
Save the
■
How to restore data from the au Settings menu
contacts
(address book)
1
from your
previous phone
to a microSD
memory card,
and insert the
card into the
product
Refer to the
On the Home screen,
[
] → [Manage
instruction manual
[Basic] → [Contacts]
contacts] →
of your previous
[Import]
phone, etc. on
how to save the
* When a contact is
On the Home screen, [Basic]
contacts.
not registered, tap
→ [Settings]
[
] → [Import] →
the import source to
proceed to step 5.
If a saving location
screen appears,
select the desired
account or location.
■
Saving data from au Settings Menu
4
5
6
1
[SD card] → [OK]
Place checkmarks
[IMPORT]
* If a saving location
on the item to
* When the import is
On the Home screen, [Basic]
screen appears,
be imported →
complete, "Contacts
→ [Settings]
select the desired
imported" appears.
[IMPORT]
account or location.
2
3
4
[Eメールアドレスの変更
Enter the security code
Confirm the contents →
へ (To change e-mail
→ [送信 (Send)]
[承諾する (I accept)]
address)]
6
7
[OK]
[閉じる (Close)]
2
3
4
"General" tab → [au Settings
[Data Transfer]
Select a method for returning
Menu]
* If the terms of use appears,
data
check the content and follow
* You need to setup an au ID to
the onscreen instructions.
restore data using [auスマートパ
スのサーバから戻す (Restore data
from au Smart Pass servers)]
(data backed up on au Smart
Pass servers).
2
3
4
"General" tab → [au Settings
[Data Transfer]
Select a saving location
Menu]
* If the terms of use appears,
* You need to setup an au ID to save
check the content and follow
data from [auスマートパスのサーバに預け
the onscreen instructions.
る (Save data to au Smart Pass server)]
(saving data to au Smart Pass servers).
"BasicManualapplication"
MakingCalls
■
Downloading "Basic Manual application"
■
Entering a phone number to make a call
1
2
1
On the Home
[UPDATE] →
On the Home screen,
screen, [Support] →
[CONTINUE]
[
]
[Basic Manual]
* If confirmation
■
Calling from Contacts
screens are
displayed, follow the
1
onscreen instructions
to operate.
■
Using "Basic Manual application"
1
2
3
On the phone
screen, tap
"Contacts" tab
On the Home
Confirm contents
The Basic Manual cover
■
Calling from Call logs
screen, [Support] →
displayed → [
]
is displayed.
[Basic Manual]
1
On the phone
screen, tap "Call
logs" tab
* Packet communications fees are charged for downloading the "Basic
Manual application" (no charges for Wi-Fi
®
connections).
When [SDカードから復元する (Restore
When [auスマートパスのサーバから戻す (Restore
data from SD card)] is selected
data from au Smart Pass servers)] is selected
5
6
5
If you selected [SDカード
Place checkmarks on the data
Place checkmarks on the data
から復元する (Restore data
you want to restore → [戻す
you want to restore → [戻す
from SD card)], select your
(Restore)]→[完了 (Done)]
(Restore)]→[完了 (Done)]
previous au phone model
* This screen is displayed if you
* When a confirmation screen
selected [携帯電話のデータを戻す
appears, follow the onscreen
* This screen is not displayed if
(Restore mobile phone data)].
instructions.
you selected [auスマートパスの
* When a confirmation screen
サーバから戻す (Restore data from
appears, follow the onscreen
au Smart Pass servers)] on the
instructions.
restore data method screen.
When [SDカードに保存する
When [auスマートパスのサーバに預ける (Save
(Saving to SD card)] is selected
data to au Smart Pass server)] is selected
5
5
If you want to use the "Data
Storage App" application
to automatically save your
photos and contacts to the
au Smart Pass server, you
can set it up by following the
procedure below.
On the Home screen, [Basic]
→ [Settings] → "General" tab
Place checkmarks on the
Place checkmarks on the data to be saved,
→ [au Settings Menu] → [Data
data to be saved, [預ける
[預ける (Save)] → confirm the details, follow
Transfer] → place checkmarks
on the data to be saved
(Save)] → [完了 (Done)]
the instructions on the screen → [完了 (Done)]
* When a confirmation screen appears,
follow the onscreen instructions.
ReceivingCalls
You can receive a call in the following steps.
* "Receive an incoming call over the operation screen" is set to "ON" in Sync Call settings by default. This
section describes with the default setting mainly.
2
1
2
Enter a phone
[Accept] during an
The call starts.
number → [
]
incoming call
■
Receiving a call during sleep mode
2
3
Make calls via the same procedures when the Sync Call is OFF, and also when the
"Receive an incoming call over the operation screen" in the Sync Call settings is "OFF" .
1
2
Tap the other party
On the contact
to be called
details screen, tap
* Tap [
] to skip
a phone number
the contact details
Flick (swipe) "Answer"
The call starts.
screen and directly
in any direction during
make a call.
an incoming call
■
Receiving calls in the Second screen
2
3
Tap the other
Tap a phone
1
2
party to be
number
called
Flick (swipe) "
" to
The call starts.
the right during an
incoming call
ReducingBatteryConsumption
■
Using Battery Saver
Set up to switch to Battery Saver Mode automatically when the battery is running low.
1
2
3
On the Home screen,
"General" tab → [Battery
[
] on "Battery saver"
[Basic] → [Settings]
& power saving]
* Confirm the status such
battery etc. on "BATTERY
INFORMATION".
■
Setting Battery saver on timing
1
2
3
On the Home screen,
"General" tab → [Battery
[Battery saver]
[Basic] → [Settings]
& power saving]
3
[End] to end the call
■
Rejecting an incoming call
When you reject a call, the caller is
informed that there is no response.
3
1
[End] to end the call
[Decline] during an
incoming call
3
When ending a call
flick (swipe) "
" to
the left
4
5
[Turn Battery saver on]
Tap timing
Advertisement
