OPERATING INSTRUCTIONS
TOMMY HILFIGER ANALOG/DIGITAL CHRONOGRAPH WATCH-
1/100 OF A SECOND with alarm function
D
Stopwatch (start/stop/ad)
A
EL backlight
T
Crown (-1 -2)
B
Mode (select/change)
C
Stopwatch (set/stop/reset)
This Tommy Hilfiger analog/digital chronograph features center-mounted analog hour, minute and
seconds hands; a two-window/12-digit LCD (liquid crystal display) with daily alarm/hourly chime/snooze
function, 1/100 chronograph with split-time function, 12/24-hour time format selection, and EL backlight.
Using the buttons
Press button A to activate EL backlight for 3 seconds in any mode.
Press button B to move between/select modes.
Buttons C and D are used to adjust settings and operate the chronograph.
NOTE: Press and release a button repeatedly to advance displayed information in single increments;
press and hold button down to advance information in a display rapidly.
To set analog time:
1. Pull crown T out to position 2.
2. Turn crown T in either direction to set hands to desired time.
3. Push crown T back in to position 1, flush against case.
DIGITAL MODES
There are four modes of digital operation: Real Time, Chronograph, Alarm and Time Setting.
To select/change mode:
Use push-button B to select/enter desired mode. Each time button B is pushed, the mode will change in
this sequence: B –> Real Time (seconds not flashing) –> B –>Chronograph –> B –> Alarm –> B –>
Time Setting (seconds flash) –> B –> Real Time (seconds not flashing).
NOTE: Watch will automatically revert to Real Time mode following a minute of inactivity in any other
mode.
1
Need help?
Do you have a question about the 1790784 and is the answer not in the manual?
Questions and answers