Error Codes - Westinghouse WRB5004 User Manual

ERROR CODES & ALARMS
Alarms
ALARM ICON
Non I&W
Non I&W

Error codes

ERROR CODE
Communication Error
Sensor – Open Circuit /
Short Circuit
Ice cube tray water fill not detected This error indicates that when an ice
WHAT IT MEANS
Freezer Temperature Alarm
Activates if the freezer temperature is
10°c over set temperature for a period
of 50 minutes (except during a defrost).
An alarm will sound the temperature
icons will flash.
Door Alarm
Activates if the refrigerator or freezer
doors are left open for longer than
2 minutes.
An alarm will sound and the affected
compartment icon will flash and the
temperature and icons will fade on
and off.
WHAT IT MEANS...
If you see this icon displayed (Ice & Water
model) or the top temperature icon is
flashing it means that the control has lost
contact with the main control board.
The appliance will operate at its last
known setting, all auxiliary functions will
not work.
If you see this icon displayed (Ice & Water
model) or any combination of the second
and fourth temperature icons are flashing
it means that an error has been detected
on a sensor.
The refrigerator will run in a default cycle
to prevent food spoilage.
harvest occurred and a tray water fill was
attempted, that the tray sensor did not
get above 0°C.
OPERATION
• To deactivate the alarm for 50
minutes press any button.
• To deactivate alarm for 12 hrs on the
ice & water model press and hold
Select Mode for 10 seconds for non
ice and water models press and
hold any button for 10 seconds.
• Alarm will sound and icon will flash
indicating which door is open.
(Ice & water models)
• To silence the alarm for 8 minutes
while the door is open press any
button (the icons will continue to
flash until door is closed).
WHAT TO DO...
Turn the unit off at the power
point for 5 minutes and then turn
it back on.
Under most circumstances this will
reset the display enabling normal
function to continue.
If the error re-occurs then call
for service.
Call for service.
Check the following:
Water turned on at tap, water filter
not blocked, no kinks in water tube.
If after checking these items and
they do not appear to be the cause
of the error, call for service.
ERROR CODES & ALARMS 25