Related Manuals for Hafco Woodmaster WL-14V
Summary of Contents for Hafco Woodmaster WL-14V
- Page 1 Page 1 Instructions Manual for WL-14V (W385) 11/08/2017 INSTRUCTION MANUAL WL-14V Mini Wood Lathe 240V W385...
- Page 2 Page 2 Instructions Manual for WL-14V (W385) 11/08/2017 WOOD LATHE OPERATION MANUAL Model No. WL-14V Edition No : SWL-001 Date of Issue : 07/2017...
- Page 3 Page 3 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL MACHINE DETAILS MACHINE WOOD LATHE MODEL NO. WL-14V SERIAL NO. DATE OF MANF. Distributed by www.machineryhouse.co.nz NOTE: This manual is only for your reference. Owing to the continuous improvement of the machine, changes may be made at any time without obligation or notice.
-
Page 4: Table Of Contents
Page 4 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL C O N T E N T S: SPECIFICATIONS............4 FEATURES................ 5 SAFE WORK PROCEDURE........... 6 Before Operating Safety Checks......6 Operating Safety Checks........6 After Operations And Clean Up......6 Potential Hazards And Injuries...... -
Page 5: Specifications
Page 5 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SPECIFICATIONS Product Dimensions: Weight................................. 43 kgs Width (side-to-side) x Depth (front-to-back) x Height..........852 x 270 x 442 mm Footprint (Length x Width)......................825 x 216 mm Main Specifications: Swing Over Bed............................356 mm Swing Over Tool Rest Base........................ -
Page 6: Features
Speed Range The WL-14V Variable Wood Lathe is fitted with a 2-step Electronic Variable Speed motor with a . low range for slower speeds from 450 RPM up to 1800 RPM. The high range covers speeds from 900 RPM up to 3850 RPM for miniature turning work. -
Page 7: Safe Work Procedure
Page 7 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SAFE WORK PROCEDURE DO NOT use this machine unless you have read the instructions and understand the safe use and operation of the machine Sturdy footwear should be worn Dusts masks must be worn at all at all times in work areas. -
Page 8: Potential Hazards And Injuries
Page 8 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SAFE WORK PROCEDURE Cont. POTENTIAL HAZARDS AND INJURIES Eye injuries from flying debris or defective timber. Hair/clothing getting caught in moving machine parts. Airborne dust. DON’T Do not use faulty equipment. Immediately stop using the suspect equipment. -
Page 9: Assembling The Wl-14V
Page 9 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL ASSEMBLING THE WL-14V VARIABLE WOOD LATHE: Part No. Description Qty. WL-14V Wood Lathe Heavy Duty Live Centre Spur Centre Draw Bar Faceplate 150mm Tool Rest Spanner Hex Keys Power Lead 300mm Tool Rest 1. -
Page 10: Installing The Lock Handle
Page 10 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL Installing The Lock Handle 3. Align the quill so that the slot is facing upward and parallel with the top of the tailstock. 4. Install the locking handle into the top of the tailstock so that it will enter into the slot of the quill. -
Page 11: Connecting To The Power Source
During normal operation, 5 minutes of warm-up may also be required on cold weather days. The motor is one of the most important elements in the lathe. The WL-14V Wood Lathe uses a high quality and powerful DC motor to provide the best turning performance. It has been pre- wired in such a way that it allows the lathe spindle to rotate in a counter-clockwise direction when facing the spindle. -
Page 12: Changing Speeds
Page 12 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL OPERATING INSTRUCTIONS Cont. The speed range is achieved with a Variable Speed Controller. A micro-processor chip, in conjunction with other electronic components, allows the input power to be manipulated. In return, smooth Variable DC power can be delivered from the controller to the motor. -
Page 13: Headstock Controls
Page 13 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL Headstock Controls: The headstock houses the motor pulley, headstock pulley, bearings, a belt and the spindle. The headstock spindle accepts the centres and accessories with a No. 2 Morse taper. The thread size or pitch is M30 x 3.5 Pitch, RH. -
Page 14: Tool Rest
Page 14 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL Tool Rest Tool Rest Tool Rest 1. To move the Tool Slide along the bed, Lock Handle loosen the camshaft handle, move the tool slide to the desired position and tighten the cam shaft handle. -
Page 15: Maintenance
• Clean/vacuum dust buildup off of motor. Cleaning Cleaning the model WL-14V is relatively easy. Vacuum excess wood chips and sawdust, and wipe off the remaining dust with a dry cloth. If any resin has built up, use a resin dissolving cleaner to remove it. -
Page 16: Belt Replacing And Tensioning Procedure
Page 16 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL Belt Replacing and Tensioning Procedure The drive belt stretches as the lathe is used. Most of the stretching will occur during the first 16 hours, but may continue with further use. If the lathe loses power while making a cut, the belt may be slipping and need tensioning. -
Page 17: Troubleshooting
Page 17 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL Troubleshooting Sympton Possible Cause Possible Solution Machine does 1. Plug/receptacle is at fault or wired 1. Test for good contacts; correct the wiring. not start or a incor-rectly. breaker trips. -
Page 18: Spare Parts
Page 18 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SPARE PARTS SECTION The following section covers the spare parts diagrams and lists that were current at the time this man- ual was originally printed. Due to continuous improvements of the machine, changes may be made at any time without notification. - Page 19 Page 19 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SPARE PARTS...
- Page 20 Page 20 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SPARE PARTS Cont. Description Description Retaining ring 12 Ring gear Tool rest lock handle Tap screw 4x10 Tool rest cam follower Spindle bearing 300mm tool rest Circlip 47 Toolslide Spur centre...
- Page 21 Page 21 Instructions Manual for WL-14V (W385) 11/08/2017 OPERATION MANUAL SPARE PARTS Cont. Description Description Hex socket screw M8x30 1 Control panel Carriage bolt M8x120 Digital display Motor Display control board Belt tension lever Controller box Motor plate handle sleeve 1...
-
Page 22: Risk Assessment
Page 22 Instructions Manual for WL-14V (W385) 11/08/2017 General Machinery Safety Instructions Machinery House requires you to read this entire Manual before using this machine. 1. Read the entire Manual before starting 14. Use correct amperage extension cords. machinery. Machinery may cause serious injury if Undersized extension cords overheat and lose not correctly used. - Page 23 Page 23 Instructions Manual for WL-14V (W385) 11/08/2017 Wood Lathe Safety Instructions Machinery House requires you to read this entire Manual before using this machine. 1. Maintenance/Adjustments. with moving parts. Make sure the lathe is turned off and disconnect from the main power 12.
- Page 24 Page 24 Instructions Manual for WL-14V (W385) 11/08/2017...