Trouble Shooting - Guild BTC110G Instruction Manual

Trouble Shooting

Suspected malfunctions are often due to causes that the user can fix themselves. Therefore
check the product using this section. In most cases the problem can be solved quickly.
WARNING! Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorized service
centre or a similarly qualified specialist if you cannot solve the problem yourself!
Problem
1. Product does not
start
2. Product does not
reach full power
3. Unsatisfactory result
Possible cause
1.1 Not connected to power
supply
1.2 Power cord or plug is
defective
1.3 Other electrical defect to
the product
2.1 Extension cord not
suitable for operation
with this product
2.2 Power source (e.g.
generator) has too low
voltage
2.3 Air vents are
blocked
3.1 Accessory not suitable for
work piece material
Customer Helpline 0333 3201989
Solution
1.1. Connect to power supply
1.2. Check by a specialist
electrician.
1.3. Check by a specialist
electrician
2.1. Use a proper extension
cord
2.2. Connect to another
power source
2.3. Clean the air vents
3.1. Use proper accessory
17