Advertisement
OPERATION
The Platinum Series Powder Scale is a very precise measuring instrument.
We recommend using the scale on a flat and sturdy table top in a clean
environment. The presence of dirt, dust, moisture, vibrations, air currents
or use in close proximity of other electronic devices can cause adverse
effects on the reliability and accuracy of the scale. It is also recommended to
avoid exposing the scale to extreme heat or cold, the scale works best when
operated at normal room temperature. For the best results we recommend
calibrating the scale every reloading session. (See Calibration Instructions
below) After powering on wait 30-60 seconds to allow internal components
the chance to stabilize before calibrating.
1. Press POWER button.
2. Wait 1 minute for internal components to stabilize.
3. Calibrate the unit if desired.
4. Wait until [0.000] is displayed.
5. Put the object (s) on the weighing platform.
6. Using the UNITS button, you can switch between weighing units.
Capacity: . . . . . . . . . 1543.2gn/100g/3.527oz/500.00ct
Readability: . . . . . . . 0.1gn/0.01g/0.001oz/0.05ct
Units: . . . . . . . . . . . . gn/g/oz/ct
Auto off time: . . . . . 180 seconds
Operation temp: . . . 10C-30C
1. Press POWER button to turn on the scale. (Wait 30-60 seconds)
2. Wait until "0.000" is displayed, press and hold CAL button for two seconds.
3. Then the LCD will flash 0.000 first to set zero point, for which you don't
4. The display will show "PASS" and return to normal weighing mode.
NOTE:
1. Turn on the scale as described above.
2. Place the "tare item" on the platform.
3. Press ZERO button quickly and [0.000] is displayed.
4. Add the "net-weight-item".
SPECIFICATIONS
Power: . . . . . . . . . . . 4x ' A AA' Batteries (not included)
Dimensions: . . . . . . 200 x 125 x 60mm
Weight: . . . . . . . . . . . 540g
CALIBRATION
It will display and flash "CAL".
need to put any weight on the platform. After two seconds, it will flash
the second weight 50.000, place the required weight onto the platform,
and then it will flash the third weight 100.00, place the required
weight onto the platform.
Calibration is complete.
Repeat this process if PASS is not displayed.
TARE WEIGHTING
Or . . . . . . . . . . . . . . AC to 5V adapter (included)
Advertisement
