Multipoint Connection - LG PH2B Owner's Manual

Multipoint Connection

The unit can be connected to two Bluetooth devices
at the same time.
Pairing with Two Devices
1. Connect the unit to a Bluetooth device.
2. When the Bluetooth device and unit are
connected, press and hold j button for 2 seconds.
Then Bluetooth LED blinks with the sound.
Unit is changed to multi pairing mode.
3. Connect the unit to two Bluetooth devices.
Select "LG PH2 (XX)" from device list on two
Bluetooth device.
4. When connection of two Bluetooth devices are
successful, Bluetooth LED will turn on.
,
Note
y You can connect this unit with up to 2
Bluetooth devices simultaneously same
method as above description.
y When you change to multi pairing mode,
connect the unit to two Bluetooth devices
within a few minutes. Otherwise multi pairing
mode will be canceled.
y The multi pairing connection is only supported
on Android or iOS devices. (Multi pairing
connection may not be supported depending
on the connected device specifications.)
y Removable/detachable Bluetooth device (Ex:
Dongle etc..) doesn't support multi pairing.
y Even if this unit connected up to 2 Bluetooth
devices, you can play and control music by
using only one of the connected devices.
y After multi-pairing connection, it takes a little
time for the music to be played depending on
the Bluetooth devices.
y In case of multi-pairing reconnection, only one
Bluetooth device will be reconnected to the
unit automatically. The other device should be
connected manually.
y If you get out of Bluetooth effective distance
without disconnecting Bluetooth, it takes
a few minutes to connect other Bluetooth
devices. But after power off and on, you can
connect other Bluetooth devices without
waiting.
Operating 15
2