Removing The Inverter - Hitachi M300N Service Manual

Disassembly

Removing the Inverter

1. Turn off the computer, remove the battery
Figure 16
2. Remove the rubber covers and screw
Inverter Removal
3. Run your finger around the middle of the frame to carefully unsnap the LCD front panel module
4. Remove screw
a. Remove the rubber cov-
5. Lift the inverter
ers and screws.
b. Unsnap the frame from
the LCD front panel
a.
module.
c. Remove screw from in-
verter and disconnect
the cables.
c. Lift the inverter off the
LCD assembly.
c.
5. LCD Front Panel
9. Inverter
• 4 Rubber covers
• 5 Screws
2 - 22 Removing the Inverter
(page 2 -
-
1
from the inverter over and disconnect the cables
6
off the LCD assembly (Figure
9
1
2
3
6
7
8
7).
from the LCD (Figure 16a).
4
&
7 8
16d).
b.
5
4
d.
from the back.
5
from the rear of the inverter .
9