Table of Contents
Advertisement
2: Installing the Adapter Card
This chapter describes how to install your PCI-AC5, PCIe-AC5, AC5, or G4AC5, and how to configure
the jumpers on the AC5 or G4AC5.
In this chapter:
Installing the PCI-AC5 and PCIe-AC5............................................................................................................page 3
Installing the AC5 or G4AC5 .............................................................................................................................page 4
Installing the PCI-AC5 and PCIe-AC5
You can install the PCI-AC5 adapter card into any PCI expansion slot of a computer; the PCIe-AC5
can be installed into any PCIe expansion slot. Note the power requirements listed in the
Specifications table on
1. Turn off the computer. Remove the power cord and the computer's cover.
2. Before handling the card, discharge static electricity by touching the computer's metal chassis.
3. Starting with the connector end that allows the cable to lie flat, push the ribbon cable through
4. Install the card in the expansion slot. Verify that the card is properly seated in the motherboard
Chapter 1
page
19.
The power cord must be removed, as a spike may cause the computer to boot.
one of the slot openings in the computer, and then attach the cable to the adapter card.
CAUTION: Do not scratch this card or other cards in the computer, as scratching may irreversibly
damage the card or other devices.
socket. Secure the card to the chassis.
PCI-AC5, PCIe-AC5, AC5, and G4AC5 User's Guide
3
3
Advertisement
Table of Contents
