Linksys WUSB11 Quick Installation page 2

Configure the Wireless-B USB
3
Network Adapters
A
The Windows XP Wireless Zero
Configuration icon will appear
in your computer's system tray.
A
Double-click the icon.
B
The screen that appears will
show any available wireless
network. Select the network you
want.
If your network uses a wireless
security feature called Wired
Equivalent Privacy (WEP)
encryption, go to
step C.
If this network does not have
WEP encryption enabled,
make sure the box next to
Allow me to connect to the
selected wireless network,
even though it is not secure is
checked. Click Connect, and
go to step D.
B
Model No.
C
Enter the network's WEP key in
the Network key field, and re-
enter it in the Confirm network
key field. Click Connect, and
go to step D.
D
The Zero Configuration icon will
indicate a wireless connection
when your connection is
active.
C
Congratulations! The installation of
the Wireless-B USB Network Adapter
is complete.
D
®
A Division of Cisco Systems, Inc.
For additional information or troubleshooting
help, refer to the User Guide on the Setup CD-
ROM. You can also call or e-mail for further
support.
24-hour Technical Support
800-326-7114
(toll-free from US or Canada)
E-mail Support
support@linksys.com
Website
http://www.linksys.com or
http://support.linksys.com
RMA (Return Merchandise Authorization)
http://www.linksys.com/support
FTP Site
ftp://ftp.linksys.com
Sales Information
800-546-5797 (800-LINKSYS)
Linksys is a registered trademark or trademark of
Cisco Systems, Inc. and/or its affiliates in the U.S.
and certain other countries. Copyright © 2004
Cisco Systems, Inc. All rights reserved.
WUSB11_V4-XP_QI-40712NC JL