hayneedle NING006 Assembly & Operating Instructions

Coral Coast 9 ft. Steel Offset Patio Umbrella
SKU：NING006
WARNING:
1. Do not use the umbrella or umbrella base on a soft, muddy or sandy surface.
2. Umbrella base requires 100kgs in order to work properly.
3.Umbrella may not withstand high winds. To avoid injury or damage, do not use in high wind conditions. Always retract umbrella when not in use. Umbrella base
must be filled to capacity in order to work properly.
Please Note
Carefully and throughly read the instructions before and during assembly to ensure proper installation of the unit.
We strongly recommend you to keep this manual for regular review and future reference.
Storage:
1. Before storing your umbrella,make sure it is completely dry and clean.
2. Keep the umbrella in a dry and well-ventilated place to protect against mildew.
3. So that you can enjoy using your umbrella for a long time, only use very mild cleaning products on it. Then allow it to dry thoroughly. Mildew spots can be
removed with a mild cleaning product. Never use cleaning products that contain solvents, as these will bleach and damage the material.
Tip:To avoid damage, never use alkali or acidic cleaning products or steam cleaners to clean the umbrella. To prevent material damage, remove any collected
water from the canopy by either draining off the water or by dismantling the umbrella. Please remember that your canopy is NOT 100% waterproof and that water
can seep through the seams and/or the material. Your umbrella protects you from the sun and is not a rain shelter.
4. Clean with damp cloth.
Assembly & Operating instructions
Art #: IT626(8770)
-1-