Advertisement
Display only Astra 2 channels
1
2
3
Aligning your satellite antenna
1
Install your satellite antenna referring to the operating
manual supplied with it and install your FTA receiver as
shown previously. Follow these simple steps to find the
Astra 2 satellite.
When you first turn your FTA receiver on this screen
will be shown.
Press the blue LIST button on the remote control to edit
the TV Channel List.
The default channel list includes channels from a wide
range of satellites. The majority of UK channels are
broadcast from the Astra 2 satellite.
This menu allows you to edit the TV Channel List so that
it displays channels from the Astra 2 satellite only.
Press the VOLUME UP/DOWN key to scroll through the
various satellites and groups until ASTRA 28 EAST is
displayed below the TV Channel List title.
Press the EXIT button.
Note: You will only have to do this once. The receiver will
memorise the menu change even when the power has
been disconnected.
To select a channel, press the OK button on the remote
control to display the TV Channel List.
Scroll through the pages of channels using the
VOLUME UP/DOWN keys.
Use the CHANNEL UP/DOWN button to select your
channel and press OK.
2
Scan for new TV and Radio channels
1
2
3
To help with the alignment of your satellite dish press
the INFO button on the remote control.
Press 1 on the remote to turn on the built-in sat-finder.
The tone from the Sat-finder will rise in pitch when a
satellite signal is received.
Follow the operating instructions supplied with your dish
antenna when finding a satellite.
When you have found the Astra 2 satellite press EXIT.
When the antenna has been successfully positioned to
receive Astra 2 follow these steps to add the latest channels.
Press the MENU button on the remote control.
Select the Installation menu using the VOLUME UP/
DOWN key.
Highlight Auto Scan using the CHANNEL UP/DOWN key
and press OK.
Scroll down the Auto Scan menu using the
CHANNEL DOWN key.
Use VOLUME UP/DOWN keys to ensure:
Satellite is set on ASTRA 28 EAST
Scan mode is set on Free
Scan channel is set to TV + Radio
Then highlight Search and press OK
Searching for channels may take several minutes.
When complete press EXIT.
Your receiver now contains the latest Free to View
channels from the Astra 2 satellite.
Note: We advise you scan for new channels periodically.
Advertisement
