Kärcher G 3200 XK Owner's Manual page 7

1
1
4
1
7
Illustration 1:
Pass the detergent hose (A) under the ma-
chine directing the fill hole to the front of the
machine, insert detergent hose (A) on the
tank (B) and fit it on the detergent back hole,
insert fully the hose rests in the deepest tank
area.
Illustration 2:
Insert hexagonal ¼ bolts (C) on the tank
knobs (D), attach the tank to the pressure
washer frame. Align holes, insert knob (C)/
bolt (D) and tighten.
Illustration 3:
Align wheels (E) hubs with frame back hub,
align washer (F), insert pin (G) and lock with
cotter (H).
Illustration 4:
Attach the handle to the frame of the pressure
washer. Align holes, insert carriage bolts (I),
and tighten with knobs (J).
Assembling
2
1
5
1
8
Assembling
1
3
Illustration 5:
Mount nozzle holder (K) as shown on the il-
lustration, align holes, insert carriage ¼ bolt
(L) and tighten with name plate knob and 1/4
nut (M).
Illustration 6:
Place the quick connect nozzles (N) in the
nozzle holder (K).
Illustration 7:
Attach the wand (O) to the spray gun (P).
Push the wand (O) into the trigger gun (P)
and then thread the connection.
Illustration 8:
Remove the cap / dipstick from the oil level
and add the oil into the engine.
1
6
English 7