Advertisement
VOLTAGE
Ensure the supply voltage is the same as the voltage stated on the nameplate.
GROUNDING
1. In the event of a malfunction or breakdown, grounding provides a path of least resis-
tance for electrical current to reduce the risk of electric shock. This tool is equipped with
an electric cord having an equipment grounding conductor and a grounded plug. The
plug must be plugged into a matching outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
2. Do not modify the plug if it will not fit the outlet. If necessary, have the proper outlet
installed by a qualified electrician.
3. Check with a qualified electrician or serviceman if the grounding instructions are not
completely understood, or if in doubt as to whether the tool is properly grounded.
4. Use only 3-wire extension cords that have 3-pin plugs and 3-inlet sockets that accept
the tool's plug.
5. Repair or replace damaged or worn cord immediately.
6. If unsure, check with manufacturer or a qualified electrician.
TECHNICAL DATA
1. This machine uses ball bearings for longer tool life.
2. Supplied with one fine and one coarse grinding wheel.
3. Strong power for heavier duty applications.
4. Removable wheel guards for simplified wheel changes.
5. Adjustable tool rests to give you the correct working angle.
6. Accessories of eyeshields, spark breakers and tool rests are included.
ASSEMBLY
1. Fix tool rests with screws, nuts and washers supplied.
Keep tool rests vertical to grinding wheels.
Tool rests are adjustable to maintain the correct distance from grinding wheels 1.6mm
(1/16").
2. Assemble eyeshields and spark breakers by using bolts, washers and knurled nuts sup-
plied loose.
3. Install eyeshield assemblies to wheel guards. Remove top wheel cover bolt, washer
and nut and insert spark breaker. Replace bolt, washer and nut. Adjust to desired work-
ing position and tighten firmly.
NOTE: The height and angle of eyeshields can be adjusted up and down to the user's
requirement.
Page 4
Advertisement
