Compatible Flash Units - Leica SF C1 Instruction Manual

EN

COMPATIBLE FLASH UNITS

Leica SF C1 is a remote control device for the wireless operation of
system-compatible flash units arranged at a distance to the
camera. These include Leica SF 60 and system-compatible flash
units by Nissin .
1
Any number of SF 60 units can be operated and triggered with this
remote control at distances up to 100 m
operated simultaneously or can be grouped into max. three arrays
Settings can be configured for all flash units in an array simultane-
ously, but fully independent of the units in the other arrays
The following settings can be done remotely:
– Focal length and/or automatic operation of the zoom reflector
– manual flash control
automatic flash control
control
Please read the respective manual for configuring the Leica SF 60
settings.
A firmware update for the flash unit may be required. Please contact your Nissin
1
dealer for more information.
Range at optimal conditions. The "line of sight" of the remote control to all controlled
2
flash units must not be obstructed
2.4 GHz remote controls and other devices in the vicinity can impact on the range.
This applies to Leica SF 60. Other system-compatible and relevantly equipped flash
3
units allow a configuration of up to four groups.
Depending on the setting for SF C1, see p. 15
4
8
. The flash units can be
2
M , including power level selection, or
TTL including optional flash exposure
.
Electric cables, metal parts, walls, as well as other
Note:
The descriptions in this manual are generally limited to the use of
the Leica SF C1 in conjunction with the Leica flash unit SF 60. In
principle, they also apply to all other flash units that should be
controlled remotely by the Leica SF C1. Please read their
respective manuals for details on the operation and settings of
other flash units.
.
3
.
4