User Instructions - Easy@Home KB-8085 User Manual

Wet/Dry Vacuum

USER INSTRUCTIONS

To charge the Wet/Dry Vac, place the unit into the charging base and plug in the power
supply cord to an electrical outlet.
1. Make sure the Wet/Dry Vac is turned off and placed securely in the charging base.
2. Plug the power cord into a power outlet and allow the unit to fully charge for 12
hours the first time. Please note that subsequent charging times will vary depending
on how long the Wet/Dry Vac was used.
3. The charging indicator light will glow red when the unit is on the charging base and
the charging base is plugged in. The charging base can also be used to store the
crevice tool and the brush
AFTER SALES SUPPORT
888-367-7373
MODEL: KB-8085
customer-service@wk-usa.com
PRODUCT CODE: 44876 03-2015
_________ ____ ____USER INSTRUCTIONS
7