EverPaw Diabetes Blood Glucose Monitoring System Quick Start Manual

Wash your hands carefully. Be sure to rinse and dry well. Take one
new strip out of the vial and recap the vial immediately. Insert the strip
into the meter. When you insert a strip, choose the code by pressing C
or M to switch from d01~d03 to C01~C03.
The dog or cat icon will be displayed on the screen to remind you
choosing the correct animal code. Use the adjustable lancing device or
disposable lancet to take a blood sample from the paw pad. The meter
will start counting down for 5 seconds and the result will be showed on
the screen.
Remove the strip by pushing the ejector button. The meter will turn off
and result is stored automatically. (Step 5 to 10)
6
5
8
6
7
9
10
mg/dL

Quick Start Guide

Please use with EverPaw test strip
Rev:08/2016 5228PNY-M02A1