Tools And Materials Needed - Blomberg BOTR30200CSS Installation Manual

External exhaust
4
4.4 Tools and materials
needed
# 1 Phillips screwdriver
Tin snips (for cutting
damper, if required)
Gloves
Safety goggles
Over The Range Convection Microwave Oven / Installation Manual
Pencil
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Ruler or tape measure and
straight edge
" " "
Electric drill with ⁄ , ⁄ and ⁄
3 1 5
16 2 8
drill bits
Stud nderor Hammer (optional)
Level
Carpenter square
(optional)
Filler blocks or scrap
wood pieces, if needed
for top cabinet spacing
(used on recessed bottom
cabinet installations only)
Duct and masking tape
13 / 63 EN