Table of contents Information ..........10 Safety warnings Function ..........11 Attention: Controls ..........11 This device does not contain any parts to be serviced by the user. Electrical equipment Programming the remote control ... 12 must be installed and fitted by qualified What to do when...
Function The Instabus EIB / IR converter • receives IR signals from standard IR re- mote controls and operates lighting, hea- ting and other equipment in accordance with the commands received (FIG. A). • transmits IR signals to TV, audio or other remote-controlled equipment in the room (FIG.
Programming the remote control N.B.: The EIB equipment which the Important Instabus / IR converter is intended to control • Make sure during programming of the IR or the EIB sensors controlling the Instabus / keys that the keys of the remote control IR converter must have been programmed are pressed as briefly as possible.
EIB installation cy of 455 kHz fitter. • Radio remote controls and transmitters • The old Gira IR system cannot be used eit- her..the remote control cannot be program- med? • Check that the remote control can be used in combination with the Instabus / IR converter (see chapter 6).
Deleting the IR memory The place of installation must therefore be chosen so that After the installation and before program- • in operation, the IR remote control can be ming of the IR keys, it is useful to delete the easily pointed to the Instabus / IR conver- IR memory beforehand by proceeding as fol- ter;...
Electrical equipment must be installed and description of the fault: fitted by qualified electricians only. Gira Failure to observe any of the instructions Giersiepen GmbH & Co. KG may result in irreparable damage, in fire Service Center and in other hazards.