Security System Block Diagram - Honeywell HAS-QN0 Reference Manual

Security System Block Diagram

The diagram below is an overview of a security system connected to the Home
Automation Server .
SMOKE DETECTOR
MOTION
SENSOR
SMOKE DETECTOR
SMOKE DETECTOR
SMOKE DETECTOR
KEYPAD
SECURITY
PANEL
* NOTE: THE INTERFACE MODULE IS OPTIONAL.
REFER TO YOUR SECURITY PANEL DOCUMENTATION FOR MORE INFORMATION.
Note: Refer to manuals supplied with the security system panels for setup
instructions. To configure the Home Automation Server to work with the security
system, refer to the HAL manual supplied with the HALPro option that you
www.automatedliving.com
purchased or go to
User interface with the Honeywell Home Automation server may be achieved by
computer, home telephone or microphone.
Be sure that the right port number and device connection protocol is selected while
configuring HAL.
The setup screen to configure a security system would look similar to the screen
below. The installer should select the panel type and connection mechanism (COM
Port number if it is a serial port) matching the physical connection. Also configure
the security code for arming and disarming the security system.
For further configuration of security panel control through the Home Automation
Server (for things such as schedules, tasks and events), refer to the HAL manual
supplied with the HALPro option that you purchased or
website.
CARD READER
SURVEILLANCE
CAMERA
CARD ACCESS
HONEYWELL HOME AUTOMATION SERVER
INTERFACE
RS232C COMMUNICATION
MODULE*
COMM PORT
.
– 12 –
USER INTERFACE
OPTIONS
COMPUTER PHONE MIC
HAS-001-V0
www.automatedliving.com