Noritz NAW-1 US Quick Manual

Pre-installation Checklist
Internet connection
Check the internet connection is available.
Noritz heater
"Noritz heater compatibility with this product".
If you are not sure which heaters are compatible,
refer to the Noritz website shown below for a list of
approved Noritz heaters.
* This product cannot be connected to heaters made by
other companies.
Wireless LAN access point
Wireless router for connecting this product.
Smartphone (or tablet device)
Device for connecting to this product.
Compatible OS as of April 2017: iOS 8.0 or later/
®
Android™ 4.0 or later.
For the latest supported OS, refer to our website below.
Noritz website: http://www.noritz.com/
Install the NORITZ CONNECT App
Install the App according to the OS's instructions.
1. iOS (iPhone , etc.)
® ®
Go to the App Store and install NORITZ CONNECT.
2. Android
Go to the Google Play™ store and install NORITZ
CONNECT.
How to open the front cover
When setting up this product, it is necessary to open the
front cover.
To open the front cover, grab the ribbed stoppers on each
side of the front cover, slide the cover up then pull off the
front cover.
Front Side
Stopper
1st step Account Registration
To register your account, start the
App and tap "Don't have account?
Sign up".
* You can also sign in to your
"Facebook" or "Twitter account".
Top screen
Enter your Full name, Password
and Confirm Password, then tap
"Register".
After registration is completed,
you are automatically signed in.
* To verify Terms and Conditions,
go to "Terms and Conditions".
Account Registration screen
2nd step Register the heater
To register your heater to your
account, tap either "Add a
heater" or "Scan QR Code" .
Select a registration method
Add a heater Scan QR Code
[Register your heater manually]
Tap the "Add a heater".
Follow the directions on the screen and enter the "Model
Name" and "Serial Number", then tap "Submit Data".
[Register your heater automatically]
Tap the "Scan QR Code".
Scan the QR code is shown on the rating plate of
the heater.
When the QR code has been successfully scanned,
the screen changes.
If you have not finished the heater
warranty registration, the screen
switches to the Warranty
Registration screen. Follow the
directions and enter the required
information.
Check all the information is
correct, then tap "Submit
Warranty".
Warranty information is used for
user information of this product.
Warranty Registration
* Registered warranty information cannot be changed
after registration is complete.
Notification
User information of this product can be changed
the menu after completing the setup procedure.
Be careful when registering information, as warranty
registration information cannot be changed.
Continued on back page
* From 3rd step, you will need to operate this product's button.
Open the front cover.
from