Chapter 5: Maintenance And Troubleshooting; Changing The Battery - Accu-Chek Performa Operator's Manual

Chapter 5: Maintenance and Troubleshooting

Changing the Battery

1. Open the battery door on the back of the meter by pushing
the tab in the direction of the arrow and pulling the door up.
Remove the old battery.
2. Insert the new battery with the + side up.
3. Put the battery door back in place and snap it closed.
4. Turn on the meter. Confirm that the time and date are correct.
Notes:
• The meter uses one 3‑volt
lithium battery, type 2032.
• All control and blood glucose test
results remain saved in memory.
45