Baby Jogger Bassinet Kit Assembly Instructions

city select bassinet kit
Assembly Instructions
1 From existing City Select Seat: Remove
seat from seat frame by unsnapping
all fabric and unfastening Velcro strap
around the footwell.
4 Place bassinet within seat frame so the
top of the seat frame is aligned with
the top of the Bassinet.
Note: The top of the seat frame and
top of the Bassinet are marked "TOP"
for your convenience.
8575 Magellan Parkway, Suite 1000 • Richmond, VA 23227 • T: 800-241-1848 • F: 804-262-6277 • www.babyjogger.com
box includes:
1 Bassinet Fabric
1 Foot Bar
1 Foot Cover
2 Remove footwell frame from upper seat
frame by pressing buttons on both sides
of footwell and gently pulling until the
pieces separate.
5 Attach upper U-shaped bassinet support
rod around the top section of the seat
frame on both sides.
Other items needed:
(From existing stroller seat)
1 Seat Frame
1 Canopy
3 Insert Foot Bar from the Bassinet
Kit into the seat frame until it clicks
into place.
6 Fasten all snaps around the top portion
of the Bassinet to the top portion of the
seat frame.
www.babyjogger.com