Step 1: Download the app Download the Momentum App from the Apple App Store or Google Play. Connect your mobile device Wi-Fi to the network you want your camera to be paired to. Important: Make sure the app you download matches the same logo as shown above.
Step 2: Create an Account Sign up for a new account. Once you’ve finished entering your information, you will receive an email verification link. Click on the email link to activate your account. Return to the app and sign in.
Page 4
Step 3: Plug in Niro Micro-USB Power Port Connect the Micro-USB cable to the back of the camera and the power adapter. Plug in the power adapter to an outlet.
Page 5
Step 4: Pair Niro IMPORTANT: Make sure your mobile device is connected to the Wi-Fi network. From the Momentum app, select Pair Device. Select the Garage Door Controller from the list of devices. Go to your mobile device’s Wi-Fi settings.
Step 5: Connect to Wi-Fi Network Go back to the Momentum App. Your Wi-Fi network will auto load, so you will just need to enter your network password. (If your Wi-Fi network did not show up, that means your mobile device was not connected to it prior to pairing.
Page 7
Step 6: Mount Niro Method 1 Method 2 It’s recommended to have Niro mounted hanging upside down from the bottom of your garage opener. You may use the provided sticker and metal plate to attach the device.
Page 8
Step 7: Connect Wires to GDO Unplug your garage opener. Locate your garage wall remote console. You should see some wires that come out of it that lead all the way to terminals on the back of your garage opener.
Page 9
Press tabs to release Note: Your ports may look different from this image. Connect Niro’s wires into the same wire ports as your garage wall remote console. This may require loosening the tabs or screws depending on your garage opener model.
Page 10
Insert the other end of the wires into the and 2 terminals on the back of the Niro device. You may need to use a tool to push down on the buttons to release and insert the wires. Note: Both wires are neutral, so it doesn’t matter which color wire goes into which of the two ports.
Page 11
Step 9: Test the Controls Plug back in your garage opener and open the Momentum App. Select the blue garage tile to access the garage door control screen. In this screen, you will get a live view of the state of your garage.
Quick Tips: Light Indicators & Status 1. Solid – Booting 2. Slow Blinking – Disconnected from Wi-Fi 3. Double Blinking Blue – Ready to connect to Wi-Fi. 4. Blinking Blue – Connected to Wi-Fi 5. Solid Blue – Live streaming Note: If the camera has failed to connect to your Wi-Fi, try resetting the camera by following these steps.
Page 13
Quick Tips: 2. The camera will then start the reset sequence. Note that the camera will still be bound to the same Momentum account it was initially paired with. 3. During the reset sequence, the camera’s indicator light will go from...
Troubleshooting - The pairing method has been updated for newer devices. - If you are having trouble connecting or using your device, please contact our customer service team. Toll Free: 1 888 818 0436 E-mail: help@momentumcam.com...
Need help?
Do you have a question about the Niro and is the answer not in the manual?
Questions and answers