Configuring The Radios; Adlconf Configuration Software; Factory Default Settings - Pacific Crest ADL Vantage Pro User Manual

Configuring the Radios

ADLCONF configuration software

ADLCONF is the software application for configuring and troubleshooting all Advanced
Data Link (ADL) radios. Running the ADLCONF software on a computer attached
through a serial cable to an ADL radio enables you to check the status of the radio,
enter receive-only channel tables, and set radio parameters such as channel bandwidth
and output power. Channel tables for transmission of data must be obtained from
authorized Pacific Crest dealers. If your radio did not come with a channel table already
installed, you can obtain one from your dealer and then import it using the ADLCONF
software.
The latest version is available for free download from
php?page=updates. The ADLCONF User Guide that describes how to configure ADL
radios is available on the Pacific Crest website or by launching ADLCONF program and
clicking Help / User Guide.

Factory default settings

To return the radio to its factory default configuration, use the ADLCONF software. Click
Restore Factory
shows the factory default settings:
Description
Device Status
Chanel/Frequency
Channel Tx Frequency
Data Protocol
Radio Link Rate
Operation Mode (Trimble protocol)
Sensitivity
Rx LED Meaning
Serial Baud
Advanced Menus
CSMA
Security Code
Edit Configuration
Scrambling
Forward Error Correction
Language Select (ADL Vantage Pro only and ADL
Vantage 35)
11
to the right of the screen and then click
http://pacificcrest.com/support.
. The following table
Program
Default Setting
Battery status
Channel 01 and frequency (MHz)
Channel No. and frequency (MHz)
Transparent EOT (End of Transmission)
9600
Base/Rover
High (Rover)
Signal Received
38000
Hide
On
Off
Enabled
On
On
English
ADL Vantage/ADL Vantage Pro/ADL Vantage 35