Juna JRDAB-02 Installation Manual

Can for rns-e dab/dab+ module for car
Hide thumbs Also See for JRDAB-02:

Advertisement

JRDAB-02
DAB/DAB+ module for CAR
1. INSTRODUCTION ..................................................................
2. RECOMMENDATIONS ...........................................................
4. ANTENNA CONNECTION .....................................................
7. CODING ..................................................................................
8. BASIC TECHNICAL PARAMETERS ......................................
9. ELEMENTS OF THE SET .......................................................
JuNa
PPHU
ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND
INSTALLATION MANUAL

Table of Contents

Manufacturer
Model:
JRDAB-02 CAN for RNS-E
2
2
4
5
6
7
8
9
9

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JRDAB-02 and is the answer not in the manual?

Questions and answers

Summary of Contents for Juna JRDAB-02

  • Page 1: Table Of Contents

    JRDAB-02 Model: JRDAB-02 CAN for RNS-E DAB/DAB+ module for CAR INSTALLATION MANUAL Table of Contents 1. INSTRODUCTION ..............2. RECOMMENDATIONS ............3. CONNECTION SCHEDULE OF SET COMPONENTS ..4. ANTENNA CONNECTION ............. 5. DAB/DAB+ MODULE CONNECTION DIAGRAM ....6. INSTALLATION 32 PIN HEADER FROM SET.......
  • Page 2: Instroduction

    1. INTRODUCTION Digital radio tuner DAB/DAB+ for factory car radio AUDI RNSE. The JRDAB-02 module allow to receive and play digital radio stations DAB/DAB+ on factory multimedia system using the AMI platform. The device has the function of tracking the selected station while driving (SERVICE FOLLOWING).
  • Page 3 In the interest of high quality and development of our products, JUNA Electronics reserves the right to make technical changes. In the case of a warranty claim, the device should be sent back to the seller in original packaging with a detailed description of the problem with attached purchase invoice.
  • Page 4: Connection Schedule Of Set Components

    3. CONNECTION SCHEDULE OF SET COMPONENTS Correct placement of JRDAB-02 components: 1. JRDAB-02 module connection place 2. Factory radio system 3. DAB/DAB+ antenna installation place JuNa PPHU Manufacturer ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND...
  • Page 5: Antenna Connection

    4. Antenna connection The JRDAB-02 assembly kit includes an active antenna that must be mounted according to the instructions described below. The JRDAB-02 module is adapted to be connected with active antenna which supports the "Phantom" power system - 12V, max 200mA.
  • Page 6: Dab/Dab+ Module Connection Diagram

    RNS-E connector FAKRA INFORMATION: If DAB/DAB+ option doesn’t appear in the Source menu after connection of JRDAB-02 module then AMI platform must be activated via OBD connector (see item 4/p.4) JuNa PPHU Manufacturer ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND...
  • Page 7: Installation 32 Pin Header From Set

    W-RD103 bundle. In case when vehicle is not equipped with additional devices uses 32 Pin AMP Connector then it is necessary to use 32 Pin AMP Connector which is included in JRDAB-02 set and install wires form cable of W-RD103 bundle.
  • Page 8: Coding

    We can achieve this, e.g. by: - Momentary disconnection and connection of the radio power supply. - Holding the buttons (for about 10 seconds) until the radio is reset. JuNa PPHU Manufacturer ul. Zgorzelicka 34 , 97-200 Tomaszow Mazowiecki POLAND...
  • Page 9: Basic Technical Parameters

    3. Communication and control - Metal 4. Housing - 78mm x 95mm x 27mm 5. Dimensions - 210g 6. Weight 9. ELEMENTS OF THE SET 1. DAB/DAB+ radio module [JRDAB-02] 2. Connection cables [W-RD103] 3. Antenna [TLG7205] TLG7205 JRDAB-02 W-RD103 JuNa PPHU Manufacturer ul.

Table of Contents