ICON iKey Pro User Manual page 12

Assign the MIDI channels to the Sustain pedal
5
Select your desired MIDI channel from 1-16 for the sustain pedal
Assign the CC value to the Sustain pedal
6
Select your desired CC number from 0-127 in the pull-down menu. The default
is "64" as for Sustain.
Setting the Velocity Curve for your iKey Pro
7
There are 4 difference velocity curves for you to select. Please refer to P.11 for
the velocity curve diagrams.
"Save file" button
8
Click this button to save your current settings for the iKey Pro. The file is an
".ikeypro" file.
"Load file" button
9
Click this button to load a previously saved ". ikeypro" setting file for your iKey Pro.
"Send Data" button
10
Click this button to upload the iMap software settings to your iKey Pro via
USB connection.
(Note: You must have connected your iKey Pro to your Mac/PC, otherwise the settings
upload will not be successful.)
"MIDI Devices" button
11
Click this button, a MIDI device select window
will appear as shown in diagram 1. Please
select "ICON iKey Pro" for the MIDI Out Devices.
"Firmware Upgrade" button
12
Click this button to enter into the firmware upgrade window for iKey Pro.
Please refer to P.10 for the firmware upgrade procedure.
9
TM
Diagram 1