Advertisement
Charge the CameraLink
1
Charge the SlingStudio
included USB cable from the device to a USB wall charger
(not included) with a rating of at least 10W (2A, 5V). The
CameraLink is fully charged when all four battery LEDs are
green, which can take up to 2½ hours.
Power On the CameraLink
2
Important: If you have multiple CameraLinks, each one must be
powered on and paired one-at-a-time to SlingStudio.
Connect the CameraLink to your camera's HDMI output port
using the correct HDMI cable.* Then press and hold the
power button for 3 seconds, until the power LED blinks red.
Camera
Note: To power off the CameraLink, press and hold the power button for
3 seconds, until the power LED blinks white.
*The included HDMI D-to-C cable works only with cameras that have a mini-HDMI port.
If your camera has an HDMI A or HDMI D port, please find the correct cable at
MySlingStudio.com/store.
CameraLink by connecting the
™
3 seconds
Advertisement
