FCC NOTE ––––––––––––––––––––––––––––––––––––3 Checking Parts ––––––––––––––––––––––––––––––––4 Samsung SCW-R500 & SCW-R510 terminals connect traditional wired Terminal Information –––––––––––––––––––––––––––5 telephones to a wireless base station which delivers the call to the public Setting Up Your Terminal –––––––––––––––––––––––6 telephone network, instead of direct wired connection the network.
Privacy of communication may not be SAMSUNG adaptor for any other usage. ensured when using this phone. Use only the SAMSUNG provided antenna. Do not use the antenna for any other usage. Do not install the terminal near water, for example, near a bath tub, sink, wet basement, or swimming pool.
SCW-R500 1/9/99 12:06 PM Page 4 CHECKING PARTS TERMINAL INFORMATION Once you have unpacked your consumer package, check to make sure that you have all the parts shown below. If any piece is missing or broken, please call your dealer.
Connect a conventional wired telephone to a RJ-11 phone port. Connect the DC power cable to FWT. (SCW-R500: 3 RJ-11 phone ports / SCW-R510: 2 RJ-11 phone port) Use the telephone compatible to FCC part 68 as possible, otherwise it Connect the AC power connector to External power supply.
Page 6
SCW-R500 1/9/99 12:06 PM Page 8 Setting up your terminal Setting up your terminal Screws and Caps are provided for mounting the unit on a wall. FWT Wall Mount Installation Screws and Caps are recommended for most wall surface. For wooden wall installations, only the screws are required.
SCW-R500 1/9/99 12:06 PM Page 10 Setting up your terminal LED indications are described in the following table: Color Condition Meaning Basic Operation – No Power is being supplied the terminal. Power Normal operation. No service condition. In this case, contact your dealer.
SCW-R500 1/9/99 12:06 PM Page 12 MAKING CALLS First, check to see that your FWT Phone is turned on. If the Power LED is lit, that means the power is on. Advanced Feature Pick up the handset. You hear a dial tone.
SCW-R500 1/9/99 12:06 PM Page 14 OPER WXYZ ADJUSTING VOLUME RESTRICTING USE OF THE PHONE You can control the sound volume on your phone. Used when you wish to block outgoing calls from being made, but still wish to receive incoming calls at any time. This feature can be disabled and enabled through simple keypad number code entry.
SCW-R500 1/9/99 12:06 PM Page 16 CHANGING THE LOCK CODE Used when you wish to change the lock code of the terminal. The programmed lock code prevents the terminal from being operational to any other people without your permission. This feature can be disabled Optional Features and enabled through simple keypad number code entry.
SCW-R500 1/9/99 12:06 PM Page 18 OPTIONAL FEATURES Call Waiting Call Waiting is a feature which enables you to be alerted to a second Miscellaneous incoming call while you are on the first call of your telephone. You have the option of responding to the second call while putting the first call on hold or you can disable the Call Waiting option during a particular call.
SCW-R500 1/9/99 12:06 PM Page 20 MENU OPTIONS TABLE Explanation Decides whether alert 1. Setting beep should sound at one warning beeps minute intervals when you release make or receive a call. 2. Changing the Used when you change Lock code...
Multi Connection Supports 5 REN If service is available with the operational telephone, replace or repair your SCW-R500 : 3 telephone equipment. If service is still not available, then follow instructions RJ-11 Phone Port under "Troubleshoot the Fixed Wireless Terminal".