Programming The Remote Control - LG 42LB7RF-TB Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE CONTROL

The remote control is a multi brand or universal remote. It can be programmed. to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1
To find out whether your remote can operate the device without programming, turn on the
device such as a VCR and press the corresponding mode button on the remote.
After that, press the POWER button. If the device is turned off then it responds properly
and the remote need not to be programmed.
If not, the remote should be programmed to operate the device. The programming proce-
dures are explained below.
2
Press the MENU and MUTE button continuously at the same time for 2 seconds, the cur-
rent selected device button will be illuminated.
If you don't press any button for 20 seconds, the light on the mode button will be turned
off. In that case, you have to repeat from step 2.
3
Enter code numbers using the number button on the remote by referring the code table on
the following pages. When pressing the button, the light blinks at a time.
If the device turned off, the programming is successful.
4
Press the MENU button to store the code. After blinking twice, this code is stored.
5
Test the remote functions to see if the device responds properly. If not, repeat from step 2.
88