Disc Playback; Disc Tray; During Playback; Selecting The Video Format - Samsung HT-Q9 Service Manual

Disc Playback

Note
•
Depending on the content of
the disc, the initial screen may
appear different.
Samsung Electronics
1
Press OPEN/CLOSE button to open the

disc tray.

2
Load a disc.
•
Place a disc gently into the tray with the disc's label
facing up.
3
Press OPEN/ CLOSE button to close
the disc tray.
DVD VCD CD
•
Playback starts automatically.
To stop playback, press STOP during playback.
•
If pressed once, "PRESS PLAY" is displayed and the stop position will be
stored in memory. If PLAY/PAUSE (
pressed, playback resumes from the stop position. (This function works only
with DVDs.)
•
If pressed twice, "STOP" is displayed, and if PLAY/PAUSE (
pressed, playback starts from the beginning.
To temporarily pause playback, press PLAY/PAUSE

during playback.

•
To resume playback, press PLAY/PAUSE (

Selecting the Video Format

Press and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
•
By default, the video format is set to "PAL".
•
"NTSC" or "PAL" will appear in the display. At this time, press the NT/PAL button
shortly to select between "NTSC" and "PAL".
•
Each country has a different video format standard.
•
For normal playback, the video format of the disc must be the same as the video
format of your TV.
) button or ENTER button is
) button is
) button again.
3-7