Advertisement
Quick Links
All Pro Jam Adjustable Basketball System
Models: GP12G72DM, GP12A72DM, & GP12P72DM
Installation, Operation and Maintenance Instructions
Please read all instructions before attempting installation or operation of these units
SAVE THESE INSTRUCTIONS FOR FUTURE USE
P
N
. 4 5 1 7 5 2 5 8 2
June 21, 2012
UBLICATION
O
Advertisement
Summary of Contents for Gared GP12G72DM
- Page 1 All Pro Jam Adjustable Basketball System Models: GP12G72DM, GP12A72DM, & GP12P72DM Installation, Operation and Maintenance Instructions Please read all instructions before attempting installation or operation of these units SAVE THESE INSTRUCTIONS FOR FUTURE USE . 4 5 1 7 5 2 5 8 2...
-
Page 2: Table Of Contents
Optional Post and Backboard Padding ................ 19-20 INTRODUCTION Thank you for your purchase of a Gared Sports model All Pro Jam Adjustable Backstop. To ensure that our equipment will provide years of use to you, we are including this installation, operation, and maintenance guide. -
Page 3: Safety
All Pro Jam Adjustable Basketball System SAFETY Read and understand the following warnings to prevent possible personal injury and potential damage to the equipment during assembly, setup, and operation. Before proceeding with assembly, read all instructions and assembly procedures. Make sure all parts have been received and are not damaged. -
Page 4: Specifications
All Pro Jam Adjustable Basketball System SPECIFICATIONS MODEL GP10G72DM GP10A72DM GP10P72DM 1/2" GLASS 3/8" ACRYLIC 1/2" POLYCARB Backboard 503 [228] 449 [204] 459 [208] Weight lb [kg]... -
Page 5: Parts Checklist
Your unit should be shipped with the following packages. Be sure that all packages and parts are received before proceeding with installation. Please refer to your packing slip to verify the correct board and goal has been received. Contact Gared Customer Service at 800-325-2682 or PSS Customer Service at 800-848-8034 for assistance with replacement of any parts missing or damaged. - Page 6 WASHER,FLAT .66 X 1.31 X .06 DELRIN BLK 453072577 111553503 WASHER,FLAT .50 X 1.25 X .06 DELRIN BLK ARM PKG, GP12-DM 121974131 DECAL, GARED 1.7" WHITE 123051517 DECAL, HEIGHT ADJUST GP10/12-DM 451752582 MANUAL, INSTAL-OPER GP12DM 453072560 LIFTING ARM WELDMENT, GP12DM...
-
Page 7: Installation
All Pro Jam Adjustable Basketball System INSTALLATION Tools and Materials Required for Assembly: 1. (2) Adjustable Wrenches. 2. ¼”, ½”, ”, ¾” ”, ¾”, , 1- ” Wrench 3. Phillips Head Screwdriver 4. Electric Drill 5. 11/64” Drill Bit 6. Tape Measure 7. - Page 8 All Pro Jam Adjustable Basketball System Template Plate Assembly Use the illustration below to assemble the template plate and U-bolts. Step 3: Securely tighten the top nuts against the plate. Step 2: Insert the U-bolts up through the template plate.
- Page 9 All Pro Jam Adjustable Basketball System Use the illustration below to dig and prepare the hole for anchoring the template plate & U-bolt assembly. This hole is designed to use 1/2 yard of concrete.
- Page 10 All Pro Jam Adjustable Basketball System Step 3. Set the U-bolt assembly in the concrete as shown in the illustration. Agitate the Template plate and U-bolt assembly repeatedly to eliminate air bubbles in the concrete. Make sure the template plate is resting on the level and finished concrete.
- Page 11 All Pro Jam Adjustable Basketball System Install Post 1. Concrete should be cured for 72 hours before starting installation step. 2. Place (4) ¾” Flat washer on top of the (4) ¾-10 Nut. 3. Raise and place the main post over the U-bolts as shown below. The post is heavy, so use at least two people for this operation.
- Page 12 All Pro Jam Adjustable Basketball System Install Lifting Arm and Actuator Follow the steps below to assemble the unit in the proper sequence. See the instructions on the following pages for more detailed information. 1. Install 16mm Flanged Bushing, #33, into Upper Arm Pivot &...
- Page 13 All Pro Jam Adjustable Basketball System 2. Attach the Lifting Arm, #26, to the Post Weldment using 5/8 x 13” Bolt, #36, and hardware indicated. Allow Lifting Arm to rest on Arm Stop when bolt is inserted. Tighten Lock Nut to remove clearance only.
- Page 14 All Pro Jam Adjustable Basketball System Install Upper Arms 1. Attach Upper Arms, #27, to the Upper Arm Pivot using 5/8 x 10” Bolt, #35, and hardware indicated. There are different size holes in each end of the arm. Use the larger (5/8’...
- Page 15 All Pro Jam Adjustable Basketball System 1. Attach Board Mounting Bracket, #28, to back side of Board using 3/8” Carriage Bolt, #34, and 3/8” Wiz Lock Nut, #43, as shown. 2. Remove Goal Cover to gain access to Goal mounting hardware.
- Page 16 All Pro Jam Adjustable Basketball System Install Board The Board, Goal, and Brackets can weigh nearly 185 lbs. Make sure that you have enough help to complete this operation safely! 1. Be sure that the 5/8” Flanged Bushing, #48, has been installed on each side of the Lifting Arm rod.
- Page 17 All Pro Jam Adjustable Basketball System 4. While continuing to hold the Backboard in a vertical position, swing the upper arms up to meet the Upper Board Attaching Brackets, #30, and attach using 7/16” x 2 ½” Bolts, #39, and hardware as indicated.
- Page 18 (4) 3/8” goal nuts. Level Goal and retighten. 3. Be sure that all Board and Goal hardware is tight. Install Goal Cover plate. Apply Gared Decal 1. Apply Gared Decal, #23, to each side of Lifting Arm as shown.
- Page 19 All Pro Jam Adjustable Basketball System Install Height Adjusting Decal 1. Crank Goal to the 10’-0” position. Crank counter- clockwise to raise goal. Measure from the playing surface to the top of the goal ring. Using a piece of tape, mark the location of the lower edge of the rain shield.
-
Page 20: Optional Post And Backboard Padding
All Pro Jam Adjustable Basketball System Installing Optional Padding Note: The padding options shown below are purchased separately. - Page 21 All Pro Jam Adjustable Basketball System The following illustration shows how to attach the optional LSCE72 Pro Mold Recreational Backboard Padding (if purchased). The padding may be attached before or after the backboard has been mounted in.
- Page 22 Gared Holdings, LLC Performance Sports Systems Gared Sports 9200 E. 146 Street 707 North 2 Street Noblesville, IN 46060 St. Louis, MO 63102 800-848-8034 800-325-2682 www.perfsports.com www.garedsports.com...