HORNIT Mini Instructions

7
INSTRUCTIONS
1 – press and hold to switch on/off (wait for beep)
1 – press briefly to change volume (loud, medium, quiet)
2 – press to scroll down through the 25 sounds
3 – press to scroll up through the 25 sounds
4 – press to scroll through white and green light settings
5 – press to play the selected sound
6 – press to reset to the bike bell sound (turns off light)
7 – press to play selected sound (mount on bicycle handlebar)
8 – insert plug into socket and turn to lock into place
9 – wings for fastening the Mini Hornit to handlebars
10 – rear fastening points, attach wings as shown

FITTING AND REPLACING BATTERIES

The Mini Hornit uses 2 x AAA 1.5V batter-
ies. Unscrew the screws and lift the battery
cover. Replace the old batteries with two
new AAA batteries, ensuring correct polar-
ity. Replace the battery cover and tighten
screws.
IMPORTANT
Do not recharge non-rechargeable batteries.
Remove rechargeable batteries from product before recharging.
Only charge rechargeable batteries under adult supervision.
Do not mix different types of batteries or new and used batteries.
Only batteries of the same or equivalent type are to be used.
Batteries are to be inserted with the correct polarity.
Remove exhausted batteries from the toy.
Do not short circuit the supply terminals.
Remove batteries if the product is not used for some time.
Used batteries and broken electrical and electronic products must
be disposed of at an approved collection point. Such products must
not be thrown away with household refuse.
10
BICYCLE HANDLEBARS
9
3
2
1
8
www.minihornit.com
4
5
6