Specifi cation ALWAYS READ THESE INSTRUCTIONS BEFORE PROCEEDING RT80 Thank you for buying one of our products. For safety and a full Optical Tachometer understanding of its benefi ts please read this manual before use. Technical support is available from 01923 441717 and All specifi...
It test leads or to any product which, in Martindale’s opinion, has been is recommended that you read the instructions carefully and ensure misused, altered, neglected, contaminated, or damaged by accident that the contents are fully understood.
Cautions occurs outside the guarantee period. The RT80 must only be used by a skilled and competent person who is familiar with the relevant regulations, the safety risks involved Before the unit is returned, please ensure that you have checked the and the consequent normal safe working practices, and under the unit and batteries.
2.2 Description Replace with 2 x new AAA batteries (IEC LR03, NEDA 24A), The Martindale RT80 has the following functions and features: observing correct polarity as indicated on the base of the battery 100 to 99999 rpm and 1.7 to 1666 rps ranges ...
1 to 9 as required. After 9 the digit will step back to 1. Turns on/off the RT80, turns on backlight The unit will return to the Measurement mode at the end of the above...
Auto power off (APO). 3.9 Hold Mode The RT80 has the facility to display the maximum reading, the The Set mode is selected by pressing for 2 seconds with the minimum reading, the difference between maximum and minimum unit powered off.
fi gure 1. refl ective markers to the object. Aim the RT80 so the light pattern from the LED is positioned on the Avoid exposing the sensor to light sources or applying the refl ective refl...