Iridium 9505 Messages Manual page 2

REPLY TO A MESSAGE (TO AN E-MAIL ACCOUNT)
• Press „Message Key‟ on Iridium satellite phone
• Select the menu option „Received Messages‟, press OK
• Use Scroll Key to select you message you want to view
• Select „View Options‟ by pressing the OK Key
• Select „Reply to Sender‟ by pressing the OK Key
• The email address that sent the original message will already be entered along with a blank space. Enter the text of your reply
and finish by pressing the OK Key.
• Select „Send Message‟
• Enter the destination e-mail. It should be pre populated to "+*2" so select „Send Message‟ by pressing the OK Key (if the
destination is a phone number, enter "00" or "+" in this field)
• The 9505A will display „Sending Message‟ for a few seconds and the display „Message Sent‟ if the message was
successfully delivered to the Iridium SMS center
HELPFUL IRIDIUM TEXT MESSAGE INFORMATION
• The message service center number is +881662900005. To double check, press the „Menu‟ key, choose „Message Settings‟
by pressing the „OK‟ key and then choose „Service Center‟ by pressing the „OK‟ key
• A maximum of 30 message (incoming and outgoing combined) can be stored on a SIM. If full, no other messages will
deliver until messages are deleted. Max capacity has been met if „Message‟ indicator is flashing on the screen
• The Iridium network attempts delivery for 2 days. After this time, you must initiate delivery of the message by manually registering
the phone . You can hit up arrow then the 8 key. If not picked up, messages automatically delete from the Iridium Network after 8 days
• When text messages are delivered while you are simultaneously reading or replying to existing messages, the phone may
lock up. The phone can restore by powering off and then back on
• Charges are per-message, whether the message contains 1 character or 60 characters
ENTER CHARACTERS
• Enter a letter by pressing a key as many times as necessary
• Press the „Scroll‟ key to advance the cursor
• Repeat steps 1 and 2 as many times as needed, and then press the „OK‟ key
CORRECTING AN ENTRY
To Delete a character:
• Press the „Scroll‟ key to place the cursor to the right of the character you want
to delete
• Press the „Clear‟ key to delete one character at a time or press and hold the
„Clear‟ key to clear the entire message
To Add a character:
• Press the „Scroll‟ key to place the cursor to the location where you want to
add the character
• Enter a letter by pressing a key as many times as necessary
ENTERING NAMES
You can use the keypad to produce any letter in the alphabet. For example, press the 2 key to enter letters:
Press 1 time for an A · Press 2 times for a B · Press 3 times for a C · Press 4 times for a
2